Jump to content


Photo

Power Cable Options

power cable xlr electrical moviecam

  • Please log in to reply
6 replies to this topic

#1 Danner Gardner

Danner Gardner
  • Basic Members
  • PipPip
  • 14 posts
  • Cinematographer
  • Los Angeles

Posted 14 May 2018 - 03:01 AM

Greetings,

 

I'm wanting to make some custom power cables but wanted some suggestions on a decent, two conductor cable with a flexible jacket. Let me know what you recommend.

 

Thanks!


  • 0

#2 Phil Rhodes

Phil Rhodes
  • Sustaining Members
  • 12299 posts
  • Other

Posted 14 May 2018 - 03:06 AM

I just tend to use two-core mains cable - something with a round outer, obviously.

 

Sometimes I have used scrap microphone cable - use both the cores for one leg, and the screen for the other, though it tends to be less flexible and probably will stand less current. The star quad stuff is really good, though expensive unless you happen to have some lying around unused.

 

I have some random four-core stuff I've used, too. Not sure what it is, looks a bit like four core mains cable, but you can pair the cores up again for increased capacity.

 

What are you terminating it with?


  • 0

#3 Danner Gardner

Danner Gardner
  • Basic Members
  • PipPip
  • 14 posts
  • Cinematographer
  • Los Angeles

Posted 14 May 2018 - 03:09 AM

I thought about using mic cable but was didn't know what gauge the wire is usually. The power cable would be used to power camera (24V). I would be terminating it to XLR.


  • 0

#4 Phil Rhodes

Phil Rhodes
  • Sustaining Members
  • 12299 posts
  • Other

Posted 14 May 2018 - 03:22 AM

What's the power consumption on the camera? What sort of cameras do you want to accommodate?


  • 0

#5 Danner Gardner

Danner Gardner
  • Basic Members
  • PipPip
  • 14 posts
  • Cinematographer
  • Los Angeles

Posted 14 May 2018 - 03:30 AM

It's about 2.5 Amps with normal accessories with a 6.3 Amp fuse in the body so that's the absolute max. It's specifically for a Moviecam Compact. I wanted to make a 3 pin to 4 pin XLR adapter along with 3 pin XLR power extension cables. Hoping to use the 3 pin XLR's on a variety of cameras, if need be, and adding in the adapter when using the Moviecam.


  • 0

#6 Phil Rhodes

Phil Rhodes
  • Sustaining Members
  • 12299 posts
  • Other

Posted 14 May 2018 - 03:39 AM

Eh, that's not that much. Decent mains cable would do it perfectly well. If you need all three pins populated, that's the way I'd do it. If not maybe look for some four-core stuff. You can usually get four-core and pair up the cores, and you end up with something that has a decent flexibility-to-capacity ratio.

 

I suspect a film camera may be a bit (a lot) hungrier than that on startup, and I guess the last thing you want to do is to have it get up to speed slower because it's pulling the voltage down due to losses in the cables.

 

P


  • 0

#7 Ed Conley

Ed Conley
  • Basic Members
  • PipPipPip
  • 118 posts
  • Other
  • Los Angeles

Posted 14 May 2018 - 04:22 PM

http://electronbeam....signedcablewire

 

You have to call to get pricing though.


  • 0



Technodolly

Media Blackout - Custom Cables and AKS

The Slider

New Pro Video - New and Used Equipment

CineTape

Paralinx LLC

Ritter Battery

rebotnix Technologies

Tai Audio

Visual Products

FJS International, LLC

CineLab

Broadcast Solutions Inc

Wooden Camera

Abel Cine

Rig Wheels Passport

Metropolis Post

Willys Widgets

Gamma Ray Digital Inc

Aerial Filmworks

Glidecam

Rig Wheels Passport

Willys Widgets

Broadcast Solutions Inc

Ritter Battery

Paralinx LLC

FJS International, LLC

Aerial Filmworks

Technodolly

Visual Products

Abel Cine

Media Blackout - Custom Cables and AKS

Metropolis Post

Gamma Ray Digital Inc

rebotnix Technologies

Tai Audio

Wooden Camera

CineTape

New Pro Video - New and Used Equipment

Glidecam

The Slider

CineLab