Jump to content


Photo

RED Camera LIGHTING SET UP


  • Please log in to reply
2 replies to this topic

#1 Ryan Campi

Ryan Campi

    New

  • Basic Members
  • Pip
  • 1 posts
  • Student

Posted 20 September 2010 - 08:33 PM

HELLO,

I am about to shoot a music video on the RED ONE camera using the old M SENSOR (NO MX :( )

I am shooting a performance shot in a basement and I'm using a bunch of practical bulbs hanging around the area (IN SHOT) that the artist is performing in. Now I have some supplemental lighting like a 1k chimera to act as key and some 650's for kickers. As for the bulbs I am stuck with what wattage to use. I am going hang probably at least 8-10 bare and originally I planned on 150 watt bulbs but I think that may be overkill. I'm leaning more towards 75 though I just worry since the old m sensor can get noisy with tug light that 75 isn't enough though at the same time with my supplemental lights and the fact that the bulbs are bare (at at least 8 in the shot) that will be more than enough to get a clean image. I could mix and match but I would like to have everything the same wattage even if it is only a 75 watt difference.
  • 0

#2 Mathew Rudenberg

Mathew Rudenberg
  • Basic Members
  • PipPipPipPip
  • 252 posts
  • Cinematographer

Posted 20 September 2010 - 11:39 PM

HELLO,

I am about to shoot a music video on the RED ONE camera using the old M SENSOR (NO MX :( )

I am shooting a performance shot in a basement and I'm using a bunch of practical bulbs hanging around the area (IN SHOT) that the artist is performing in. Now I have some supplemental lighting like a 1k chimera to act as key and some 650's for kickers. As for the bulbs I am stuck with what wattage to use. I am going hang probably at least 8-10 bare and originally I planned on 150 watt bulbs but I think that may be overkill. I'm leaning more towards 75 though I just worry since the old m sensor can get noisy with tug light that 75 isn't enough though at the same time with my supplemental lights and the fact that the bulbs are bare (at at least 8 in the shot) that will be more than enough to get a clean image. I could mix and match but I would like to have everything the same wattage even if it is only a 75 watt difference.


I'd go with the 150w across the board and wire them all to a 2k variac - that way you can dial in the brightness to your heart's desire... or if you feel inspired you can play with the brightness during the shot :)

As for the tungsten noise, if it bothers you throw an 80 (2 stops lost) or 82b (2/3 stop loss, but less blueing) filter on the camera to cool everything down, depending how much light you're willing to lose.
  • 0

#3 JD Hartman

JD Hartman
  • Basic Members
  • PipPipPipPip
  • 1791 posts
  • Gaffer
  • Edison, N.J. U.S.A.

Posted 24 September 2010 - 07:48 PM

Depends, are the bare bulbs serving as part of your key lighting or are they more of a visual element? If it's the latter, then I'd suggest using more lower wattage bulbs (40-60w) and wiring them through a hardware store dimmer. Take care not to exceed the rating of the dimmer, usually 600 or 1000w, depending on model.
Don't under estimate the lighting needs of the Red (or the Cannon 5d/7D). It's easier to make things darker in post, no so easy to create light (without noise or grain) where there isn't enough.

Edited by JD Hartman, 24 September 2010 - 07:52 PM.

  • 0


CineLab

Broadcast Solutions Inc

CineTape

New Pro Video - New and Used Equipment

Glidecam

Aerial Filmworks

Gamma Ray Digital Inc

Metropolis Post

Paralinx LLC

Tai Audio

Rig Wheels Passport

Abel Cine

Willys Widgets

Technodolly

rebotnix Technologies

Media Blackout - Custom Cables and AKS

Ritter Battery

Wooden Camera

Visual Products

The Slider

FJS International, LLC

Willys Widgets

CineLab

Abel Cine

Paralinx LLC

Tai Audio

Metropolis Post

CineTape

Technodolly

Ritter Battery

rebotnix Technologies

Media Blackout - Custom Cables and AKS

Visual Products

FJS International, LLC

The Slider

Aerial Filmworks

Glidecam

Gamma Ray Digital Inc

Broadcast Solutions Inc

Rig Wheels Passport

Wooden Camera

New Pro Video - New and Used Equipment