Jump to content


Photo

3-D and green screen


  • Please log in to reply
1 reply to this topic

#1 Jeremy M Lundborg

Jeremy M Lundborg
  • Basic Members
  • PipPip
  • 61 posts
  • Cinematographer
  • Los Angeles

Posted 22 August 2010 - 07:14 PM

I have very little experience in 3-D photography yet am being thrust into the middle of a project with that intention.

Some of the shots are against a green screen, nothing complicated in terms of movement, but my concern is with the overall composite.

This is surely fodder for a meeting with the vfx department, but I thought I would ask before hand if anyone here had any experience and could offer any advice or pitfalls to watch out for on set.

In my estimation it would work best with measured convergence and compatible i/o for both shots, according to the intended depth of the final shot. My concern is the practical effect of compositing a depth oriented plate into a depth oriented shot.


Thanks.

Edited by Jeremy M Lundborg, 22 August 2010 - 07:15 PM.

  • 0

#2 Keith Mottram

Keith Mottram
  • Sustaining Members
  • 824 posts
  • Other

Posted 23 August 2010 - 08:10 AM

I have very little experience in 3-D photography yet am being thrust into the middle of a project with that intention.

Some of the shots are against a green screen, nothing complicated in terms of movement, but my concern is with the overall composite.

This is surely fodder for a meeting with the vfx department, but I thought I would ask before hand if anyone here had any experience and could offer any advice or pitfalls to watch out for on set.

In my estimation it would work best with measured convergence and compatible i/o for both shots, according to the intended depth of the final shot. My concern is the practical effect of compositing a depth oriented plate into a depth oriented shot.


Thanks.


Green screen compositing is not disimilar from 2d, basically if your plates are shot correctly with the same setup then they will comp well, if not then no, as far as convergence goes shoot the same and any post convergence will sort it self out. however i do recommend getting your fx crew to take a look at ocula on nuke as it will help match up any discrepencies in the keying (and misalignment/ geometrics and color shift) which can be a major problem in 3d.
  • 0


FJS International, LLC

Paralinx LLC

Technodolly

Metropolis Post

Willys Widgets

Ritter Battery

CineLab

rebotnix Technologies

Rig Wheels Passport

Tai Audio

Media Blackout - Custom Cables and AKS

Wooden Camera

Abel Cine

Visual Products

New Pro Video - New and Used Equipment

CineTape

Aerial Filmworks

Gamma Ray Digital Inc

Broadcast Solutions Inc

The Slider

Glidecam

CineTape

Glidecam

Gamma Ray Digital Inc

CineLab

Visual Products

Technodolly

Media Blackout - Custom Cables and AKS

rebotnix Technologies

Rig Wheels Passport

Wooden Camera

Tai Audio

Aerial Filmworks

Paralinx LLC

Willys Widgets

Abel Cine

Metropolis Post

Broadcast Solutions Inc

FJS International, LLC

New Pro Video - New and Used Equipment

Ritter Battery

The Slider