Jump to content


Photo

Gate Flare - 3 Perf Eclair Cameflex

gate flare 3 perf eclair cameflex cm3 film

  • Please log in to reply
4 replies to this topic

#1 Jo Kamimura

Jo Kamimura

    New

  • Basic Members
  • Pip
  • 9 posts
  • Director
  • United States

Posted 30 June 2018 - 11:15 PM

My first test with a 3 perf cameflex was perfect except for the gate flare present in the negative.
Just want to confirm this is the case... however the triangle flare isn't vertically/horizontally flipped as the rest of the image. Looks like it's flaring/bleeding into the next frame.

As far as solutions...paint the mask? Both sides? Which paint do you recommend?

Attached below are the stills, and of the gate, with and without the shutter.

Many thanks!

film1.jpg


IMG2.jpg
IMG3.jpg
IMG1.jpg


Edited by Jo Kamimura, 30 June 2018 - 11:24 PM.

  • 0

#2 Dom Jaeger

Dom Jaeger
  • Basic Members
  • PipPipPipPip
  • 1817 posts
  • Other
  • Melbourne, Australia

Posted 02 July 2018 - 08:00 PM

What material have they used to mask down the gate to 3 perf? It looks translucent orange! On the film it looks like it's passed light through, that orange strip has a sharp edge that matches the shape of the supposedly masked gate edge. So it's more than gate flare.

 

Ideally you should replace that mask, otherwise I guess paint it front and back with a matte black paint. 


  • 0

#3 Stefan Fischer

Stefan Fischer
  • Basic Members
  • PipPip
  • 46 posts
  • Cinematographer
  • Deutschland

Posted 03 July 2018 - 11:52 AM

I think the problem is that the 3 perf mask is not flat with the original gate, same problems have been reported with some 2 perf modificated Cameflex.
  • 0

#4 Stefan Fischer

Stefan Fischer
  • Basic Members
  • PipPip
  • 46 posts
  • Cinematographer
  • Deutschland

Posted 03 July 2018 - 11:52 AM

I think the problem is that the 3 perf mask is not flat with the original gate, same problems have been reported with some 2 perf modificated Cameflex.
  • 0

#5 Dom Jaeger

Dom Jaeger
  • Basic Members
  • PipPipPipPip
  • 1817 posts
  • Other
  • Melbourne, Australia

Posted 03 July 2018 - 05:22 PM

Yes that's quite possible, because there's a gap light can reflect off the film on to that highly reflective orange mask and then back on to the film.
  • 0



Also tagged with one or more of these keywords: gate, flare, 3 perf, eclair, cameflex, cm3, film

New Pro Video - New and Used Equipment

FJS International, LLC

Glidecam

CineLab

CineTape

Wooden Camera

Abel Cine

Media Blackout - Custom Cables and AKS

Visual Products

Gamma Ray Digital Inc

Metropolis Post

Aerial Filmworks

rebotnix Technologies

Ritter Battery

Rig Wheels Passport

Broadcast Solutions Inc

Willys Widgets

Tai Audio

Technodolly

The Slider

Paralinx LLC

Rig Wheels Passport

Technodolly

New Pro Video - New and Used Equipment

Tai Audio

Wooden Camera

Metropolis Post

Abel Cine

Visual Products

Broadcast Solutions Inc

CineTape

Ritter Battery

Paralinx LLC

CineLab

rebotnix Technologies

Media Blackout - Custom Cables and AKS

FJS International, LLC

Willys Widgets

Aerial Filmworks

Gamma Ray Digital Inc

The Slider

Glidecam