Jump to content



Photo

Arri 2C High Speed

arri arriflex 2c 35mm film

  • Please log in to reply
6 replies to this topic

#1 Dylan Lewis

Dylan Lewis

    New

  • Basic Members
  • Pip
  • 4 posts
  • Cinematographer

Posted 22 September 2013 - 07:18 PM

Hello!

This is my first post here on the forum and I would like to begin it by thanking everyone who posts on here; this forum has been a huge source of information for me, basically like the film school I couldn't afford, so yeah thanks everyone.

 

I just recently acquired an Arri 2c, one that was advertised by the seller as a high speed model. It has the tachometer that reads up to 80fps, but from doing research on this forum and others, I understand that it is possible to attach that tach to a non high speed model. I've read that the only fool-proof way of determining if the camera is an actual high speed model is by the presence of four extra screws on the film gate that can adjust the pressure of the gate. But having been unable to find another picture of an Arri 2c gate to compare mine too, I'm unsure if the screws on my gate are the high speed ones or just the standard. Here's a pic of the gate on my 2c:

 

P1000159.JPG

 

Is this the high speed gate? And if so, is the combination of the gate and the 80fps tach enough to pretty much guarantee this is definitely a high speed model and is safe to run at 80fps? Just want to be sure, as I have a high speed motor on the way and would like to be sure of what I'm dealing with.

 

Speaking of the high speed motor, I've read that it needs 32v to run at 80fps. At the risk of sounding silly, how exactly do I acquire 32v of power? I can't seem to find any 32v batteries that can connect to the high speed motor. (The cable for my motor has a 4 pin XLR). Is it a case where I would need to have a battery specially fashioned? Anyone who has any experience running a 2c at high frame rates, your help would be greatly appreciated! Thanks!


  • 0

#2 Dom Jaeger

Dom Jaeger
  • Basic Members
  • PipPipPipPip
  • 1838 posts
  • Other
  • Melbourne, Australia

Posted 23 September 2013 - 12:13 AM

I'm not really familiar with the high speed models, but we have a high speed medical 2C in our museum (designed to shoot x-ray film) with an 80fps tacho and the pressure plate is the same as yours. Only one other 2C we have has the same pressure plate (but the tacho is standard 50 fps max), all the other standard speed 2Bs and 2Cs we have don't have the 4 nuts on the back of the pressure plate. So I would assume that yours is a high speed plate.

 

Aside from possibly giving the camera a fresh lube, I don't think you need to worry about anything else. The mags should be OK, 435 literature says you can use older magazines up to 130 fps, well past what your 2C can do. Test with some old stock, if there are issues it might be worth having the mag take-up and feed tensions checked.  

 

You can build a 32V battery by joining four 8V lead acid batteries in series. Something like this:

http://www.allbatter...y/8v/3-5ah.html

joined negative to positive. 

 


  • 0

#3 Mark Dunn

Mark Dunn
  • Basic Members
  • PipPipPipPip
  • 2812 posts
  • Other
  • London

Posted 23 September 2013 - 01:46 AM

A mains transformer might be the only sure way of getting full speed.

I recall that the Locam 16mm. medium-speed would only ever reach 400fps instead of the rated 500 on battery.


Edited by Mark Dunn, 23 September 2013 - 01:47 AM.

  • 0

#4 Dylan Lewis

Dylan Lewis

    New

  • Basic Members
  • Pip
  • 4 posts
  • Cinematographer

Posted 24 September 2013 - 03:42 PM

Thanks very much for your replies!


  • 0

#5 Tim Carroll

Tim Carroll
  • Sustaining Members
  • 2171 posts
  • Other
  • Chicago, Illinois

Posted 08 October 2013 - 02:56 PM

Just like sticking an 80 fps tachometer in a standard Arri 2C, you can also stick a high speed gate in a standard 2C.  The pressure plate door on the gate you have pictured does look like a high speed pressure plate door.

 

Best,

-Tim


  • 0

#6 Webster C

Webster C
  • Basic Members
  • PipPipPip
  • 112 posts
  • Other
  • Oakland

Posted 12 October 2018 - 01:08 PM

I have an Arri IIB with an academy gate. I am looking for a full aperture (Super 35) gate. I found one on eBay for the IIC but it's a high speed gate. I'm told that it would work and should be interchangeable - though the ground glass assembly might be different.

 

Have any of you ever swapped out your gate before, is it tricky?  I have pulled Mitchell and Wall movements before, but it seems like it would be little more difficult because of tight space and mirror clearance.

 

And would you recommend the high speed gate for normal shooting?


Edited by Webster C, 12 October 2018 - 01:10 PM.

  • 0

#7 Dom Jaeger

Dom Jaeger
  • Basic Members
  • PipPipPipPip
  • 1838 posts
  • Other
  • Melbourne, Australia

Posted 12 October 2018 - 07:20 PM

As far as I know there were never S35 or full aperture gates made for the 2C. There was a Scope gate for anamorphic that was full aperture height and a little wider than Academy, but not full S35 width. The cut out for the claw makes it virtually impossible for the gate aperture to be that wide. See my post in this thread with photos of the 2 gates:
http://www.cinematog...ic=62077&page=2

Some later 3Cs or hard-front modified 2Cs may have been converted to S35, but I don't know how they overcame the claw issue. The 2C viewfinder also won't cover S35 width.

I don't think you'll have an issue with a high speed gate, the only difference is the adjustable pressure plate, but it should still be within the pressure specs for normal speed filming. The pressure may be set a little less than usual, that's all. Swapping gates is fairly straightforward, but you need to be careful of any shims that may be underneath.

The bigger issue is that with a 2B you can't exchange ground glasses to frame for a different aspect ratio, and the viewfinder optics don't see much past Academy. You could possibly fit a 2C door which might give you a bit more coverage but it all seems a lot of effort to get a tiny bit more width that you can't properly frame for.
  • 0



Also tagged with one or more of these keywords: arri, arriflex, 2c, 35mm, film

FJS International, LLC

CineLab

Willys Widgets

Visual Products

Metropolis Post

Gamma Ray Digital Inc

Abel Cine

Glidecam

Tai Audio

Ritter Battery

rebotnix Technologies

Paralinx LLC

Broadcast Solutions Inc

Media Blackout - Custom Cables and AKS

The Slider

Technodolly

New Pro Video - New and Used Equipment

Wooden Camera

CineTape

Aerial Filmworks

Rig Wheels Passport

Aerial Filmworks

Ritter Battery

Abel Cine

Rig Wheels Passport

The Slider

New Pro Video - New and Used Equipment

Media Blackout - Custom Cables and AKS

Broadcast Solutions Inc

Metropolis Post

Paralinx LLC

CineLab

rebotnix Technologies

Willys Widgets

Glidecam

FJS International, LLC

Wooden Camera

CineTape

Gamma Ray Digital Inc

Tai Audio

Visual Products

Technodolly