Jump to content


Photo

Beaulieu s2008 battery help


  • Please log in to reply
5 replies to this topic

#1 Brian Williams

Brian Williams

    New

  • Basic Members
  • Pip
  • 4 posts
  • Student
  • Ann Arbor

Posted 09 August 2017 - 12:44 PM

Hello,

New guy here so I apologize if this has  been answered before, but I couldn't find the answer.  I have a s2008 camera with a dead battery. I want to recell and am wondering how you open the battery plug? holder? to get to the cells inside.  I have the old style holder with one contact on the bottom.  Thanks much

Brian


  • 0


#2 Dom Jaeger

Dom Jaeger
  • Basic Members
  • PipPipPipPip
  • 1482 posts
  • Other
  • Melbourne, Australia

Posted 09 August 2017 - 08:11 PM

Is it like the 4008 batteries?

 

With those you have to lift off the top cover plate (a bit of acetone or thinners around the edge should loosen the glue, then pry it up), and then underneath is a screw-on lid with 2 holes for a lens wrench or similar tool. They can be tough to unscrew.


  • 0

#3 Brian Williams

Brian Williams

    New

  • Basic Members
  • Pip
  • 4 posts
  • Student
  • Ann Arbor

Posted 09 August 2017 - 08:14 PM

I thought it might be like the 4008 but there were no holes under the leatherette.  So I don't know what to do....


  • 0

#4 Jean-Louis Seguin

Jean-Louis Seguin
  • Basic Members
  • PipPipPipPip
  • 689 posts
  • Other
  • Montreal, Canada

Posted 10 August 2017 - 04:10 AM

Sounds like you have the very first version of the 2008 which used four flat NiCd cells which are obsolete now. I think you'll have to start looking for a way to hook up an external power pack.
  • 0

#5 Brian Williams

Brian Williams

    New

  • Basic Members
  • Pip
  • 4 posts
  • Student
  • Ann Arbor

Posted 10 August 2017 - 08:21 AM

Yep, I have the first version.  I can get new cells by Varta that will work or I can use Nimh batteries.  I just need to figure out how the holder comes apart.


  • 0

#6 Steve Broback

Steve Broback
  • Basic Members
  • PipPip
  • 31 posts
  • Other
  • Gig Harbor, WA

Posted 16 August 2017 - 09:26 AM

My guess is that the plate under the leather is threaded into the body like the later batteries. If there are no holes in the cap you could try drilling a couple so you could use a pin wrench to unthread. Even with holes in the later caps, these are almost impossible to unscrew due to aluminum to aluminum corrosion.

Good luck!


  • 0


CineLab

Rig Wheels Passport

Tai Audio

FJS International, LLC

Media Blackout - Custom Cables and AKS

Technodolly

Abel Cine

Broadcast Solutions Inc

Willys Widgets

rebotnix Technologies

Aerial Filmworks

The Slider

Ritter Battery

Visual Products

Metropolis Post

Gamma Ray Digital Inc

Paralinx LLC

CineTape

Glidecam

CineLab

Metropolis Post

Broadcast Solutions Inc

Rig Wheels Passport

FJS International, LLC

Aerial Filmworks

Abel Cine

The Slider

rebotnix Technologies

Technodolly

Willys Widgets

Gamma Ray Digital Inc

Paralinx LLC

Media Blackout - Custom Cables and AKS

Glidecam

CineTape

Visual Products

Tai Audio

Ritter Battery