Jump to content


Photo

Rating of 16mm stock (250D / 50D)

16mm stock 250d 50d kodak rating

  • Please log in to reply
5 replies to this topic

#1 Markus Koepke

Markus Koepke

    New

  • Basic Members
  • Pip
  • 8 posts
  • Cinematographer
  • Hamburg, Germany

Posted 15 March 2018 - 04:27 AM

Hello folks.

I'm reading conflicting stuff about the rating of 16mm stock. Do you guys rate your stock a full stop over or 2/3 for day exterior? How about night exterior?

 

I'll be shooting 250D and 50D mostly for now, on regular 16. I'm already compensating for the prism light loss on my Bolex Rex5 so I don't want to overexpose too much. What are your experiences?

 

Thanks for your input!


  • 0

#2 Chris Burke

Chris Burke
  • Basic Members
  • PipPipPipPip
  • 1713 posts
  • Boston, MA

Posted 15 March 2018 - 06:18 AM

Both handle over exposure very well. They are known for it. A full stop over is no big deal. Daytime in full sun you really don't need overexposure, but night exteriors could use it. Presuming you are shooting at 24fps 1/48th and using the 250D at night, you will be close to wide open anyway. If you can change stocks, try 7219 for night time. 


  • 0

#3 Phil Soheili

Phil Soheili
  • Basic Members
  • PipPip
  • 51 posts
  • Cinematographer
  • Milan, Italy

Posted 15 March 2018 - 08:52 AM

According to Bolex the Prism takes off a 'whooping' 5% of the light. (Approxiamtely an eighth of a stop)
I wouldn't even know how to compensate for this. Or the other way 'round: If you already overexpose the neg for any other reason you shouldn't have to worry about the prism anymore.
Best of luck!


  • 0

#4 Markus Koepke

Markus Koepke

    New

  • Basic Members
  • Pip
  • 8 posts
  • Cinematographer
  • Hamburg, Germany

Posted 15 March 2018 - 09:05 AM

Thanks, guys. I guess I will stick with 1stop over for now. I read that the prism takes 25% off (http://bolexh16user....osureAdvice.htm), but it also says there that on modern stocks this can be neglected. 


  • 0

#5 Dom Jaeger

Dom Jaeger
  • Basic Members
  • PipPipPipPip
  • 1689 posts
  • Other
  • Melbourne, Australia

Posted 15 March 2018 - 11:33 PM

According to Bolex the Prism takes off a 'whooping' 5% of the light. (Approxiamtely an eighth of a stop)
I wouldn't even know how to compensate for this. 

 

From the Bolex manual:

 

Bolex prism.JPG


  • 0

#6 Phil Soheili

Phil Soheili
  • Basic Members
  • PipPip
  • 51 posts
  • Cinematographer
  • Milan, Italy

Posted 16 March 2018 - 03:38 AM

Dom, wow, (thx!) I have a similar paper that says what I shared before.
But I'll take that as a proof for my second thought - that. If you overexpose as I always do for aesthetic reasons about 2/3 of a stop, the (1/4 of stop) loss from the prism should be taken care of. ;)
Thanks for the comment! (If I find my source I'll share it)
Best
  • 0



Also tagged with one or more of these keywords: 16mm, stock, 250d, 50d, kodak, rating

Rig Wheels Passport

Paralinx LLC

Willys Widgets

The Slider

Abel Cine

Aerial Filmworks

CineTape

Broadcast Solutions Inc

Tai Audio

Media Blackout - Custom Cables and AKS

rebotnix Technologies

FJS International, LLC

Glidecam

Ritter Battery

CineLab

Gamma Ray Digital Inc

Technodolly

Visual Products

Wooden Camera

Metropolis Post

Abel Cine

Metropolis Post

Technodolly

Rig Wheels Passport

CineLab

rebotnix Technologies

FJS International, LLC

Tai Audio

Media Blackout - Custom Cables and AKS

Glidecam

Broadcast Solutions Inc

Paralinx LLC

Wooden Camera

Visual Products

Willys Widgets

Ritter Battery

Aerial Filmworks

The Slider

CineTape

Gamma Ray Digital Inc