Jump to content


Photo

Beaulieu 4008 battery packs, etc.


  • Please log in to reply
8 replies to this topic

#1 Greg Traw

Greg Traw
  • Basic Members
  • PipPip
  • 54 posts
  • Director

Posted 11 December 2008 - 11:27 PM

I was just wondering if anyone on here had the blueprints to make a 4008 battery pack with AA batteries?
  • 0

#2 Jim Carlile

Jim Carlile
  • Basic Members
  • PipPipPipPip
  • 464 posts
  • Cinematographer

Posted 13 December 2008 - 08:07 PM

Start here:

http://www.bondy.de/...008battery.html

Do you mean an external pack with AAs?
  • 0

#3 JB Guillot

JB Guillot
  • Basic Members
  • PipPip
  • 79 posts
  • Other
  • France

Posted 22 December 2008 - 04:21 AM

Hi Greg,

Depending on what you're willing to do, you'll find various tutorials around the web.

I chose the external power pack solution which is probably the safest :
- no modification on camera / battery
- uses standard AA batteries : cheap and easy to find, uses external charger, you can have multiple sets of batteries to prevent any troubles while on set
- cheap and easy to make (if you have some basic knowledge in electricity/electronics and can use a soldering machine)

I bought a contact block from Wittner (Germany), which is the most expensive part, but as far as it's the one directly linked to the camera, it prevents you from damaging any part or bad wiring.
The other parts can be found in shops selling electronic parts. I got the whole set for less than 5 bucks (4 euros maximum) : cable, connector and plastic block to hold the AA batteries.

Just follow the indications joined with the contact block (you have 3 wires : ground, 3.6V and 7.2V) and after 10-15 minutes depending on your skills...you have a brand new battery pack for you beloved Beaulieu.

I actually had some troubles with a bad contact on my solder points the first time, I had to do it again (for 5 more bucks...) and now it works perfectly !

Hope this helps.
  • 0

#4 greg ocallaghan

greg ocallaghan
  • Basic Members
  • PipPip
  • 17 posts
  • Student

Posted 23 December 2008 - 12:02 PM

Hi Greg,

Depending on what you're willing to do, you'll find various tutorials around the web.

I chose the external power pack solution which is probably the safest :
- no modification on camera / battery
- uses standard AA batteries : cheap and easy to find, uses external charger, you can have multiple sets of batteries to prevent any troubles while on set
- cheap and easy to make (if you have some basic knowledge in electricity/electronics and can use a soldering machine)

I bought a contact block from Wittner (Germany), which is the most expensive part, but as far as it's the one directly linked to the camera, it prevents you from damaging any part or bad wiring.
The other parts can be found in shops selling electronic parts. I got the whole set for less than 5 bucks (4 euros maximum) : cable, connector and plastic block to hold the AA batteries.

Just follow the indications joined with the contact block (you have 3 wires : ground, 3.6V and 7.2V) and after 10-15 minutes depending on your skills...you have a brand new battery pack for you beloved Beaulieu.

I actually had some troubles with a bad contact on my solder points the first time, I had to do it again (for 5 more bucks...) and now it works perfectly !

Hope this helps.


I made my own battery pack for my ZMII.. Why make an 'exernal' battery pack? You don't wanna hold it in your hand while shooting right? Anyways one could argue that the battery pack I made is external..

check it out and hopefully it will give you ideas on how to make your own, since it really isnt hard to do:
http://www.filmshoot...2e1798b217fc232
  • 0

#5 Greg Traw

Greg Traw
  • Basic Members
  • PipPip
  • 54 posts
  • Director

Posted 23 December 2008 - 11:55 PM

Thanks for the advice... My ZOOMII is about to move into the 21st century; well, maybe the late 20th century with double AA's. Does anyone know how to make a battery pack with a lithium ion?... :D
  • 0

#6 JB Guillot

JB Guillot
  • Basic Members
  • PipPip
  • 79 posts
  • Other
  • France

Posted 03 January 2009 - 08:31 AM

I made my own battery pack for my ZMII.. Why make an 'exernal' battery pack? You don't wanna hold it in your hand while shooting right? Anyways one could argue that the battery pack I made is external..

Wow :huh: ... I've never seen such a mod before.
The finition seems great but it's way too big in my opinion. Above all I would fear to damage my 4008 with such a but attachement on the small threads of the battery block.

I'll try to make some shots of my setup ; as it's quite compact you can easily shoot with the external battery pack in your pocket.
  • 0

#7 Greg Traw

Greg Traw
  • Basic Members
  • PipPip
  • 54 posts
  • Director

Posted 07 January 2009 - 01:43 PM

Wow :huh: ... I've never seen such a mod before.
The finition seems great but it's way too big in my opinion. Above all I would fear to damage my 4008 with such a but attachement on the small threads of the battery block.

I'll try to make some shots of my setup ; as it's quite compact you can easily shoot with the external battery pack in your pocket.


That would be great!!!
  • 0

#8 JB Guillot

JB Guillot
  • Basic Members
  • PipPip
  • 79 posts
  • Other
  • France

Posted 10 January 2009 - 02:13 PM

Here are some pics of my set up :

The Beaulieu camera with the contactor block (from Wittner) sold in an original Beaulieu cardbox... (no use but looks terribly oldschool) :
Posted Image

The homemade external battery pack : plastic block for 6 AA batteries (external charger), 2m cable and DIN contactor (sorry for the Duct Tape).
Posted Image

Complete setup : batteries are in a small pouch (for digital cameras) that easily fits in a pocket or can be fixed on your belt or on tripod.
Posted Image

I could have used another DIN contactor which is smaller (90° corner shape) to have a more compact setup but this one works good : the camera is well balanced and I've never been out of power for now...
  • 0

#9 Greg Traw

Greg Traw
  • Basic Members
  • PipPip
  • 54 posts
  • Director

Posted 10 January 2009 - 07:43 PM

Thanks...
  • 0


Visual Products

Metropolis Post

Rig Wheels Passport

Willys Widgets

CineLab

CineTape

The Slider

New Pro Video - New and Used Equipment

Technodolly

Tai Audio

Gamma Ray Digital Inc

rebotnix Technologies

Aerial Filmworks

Broadcast Solutions Inc

Wooden Camera

Glidecam

Abel Cine

Ritter Battery

Media Blackout - Custom Cables and AKS

Paralinx LLC

FJS International, LLC

Rig Wheels Passport

rebotnix Technologies

Ritter Battery

Gamma Ray Digital Inc

CineLab

Media Blackout - Custom Cables and AKS

FJS International, LLC

Technodolly

Metropolis Post

Glidecam

Aerial Filmworks

The Slider

Willys Widgets

New Pro Video - New and Used Equipment

Broadcast Solutions Inc

Paralinx LLC

Abel Cine

Visual Products

Wooden Camera

Tai Audio

CineTape