Jump to content


Photo

Matte box for Auricon


  • Please log in to reply
1 reply to this topic

#1 Roger Haney

Roger Haney
  • Basic Members
  • PipPip
  • 12 posts
  • Other

Posted 10 October 2006 - 01:27 AM

I am searching for a relatively inexepensive matte box with rails and an adapter plate for an Auricon CM-72. I have a 60mm zoom lens and I am hoping to use an anamorphic adapter. Any suggestions? Thanks! Roger.
  • 0


Support Cinematography.com and buy gear using our Amazon links!
PANASONIC LUMIX GH5 Body 4K Mirrorless Camera, 20.3 Megapixels, Dual I.S. 2.0, 4K 422 10-bit, Full Size HDMI Out, 3 Inch Touch LCD, DC-GH5KBODY (USA Black)

#2 Ian Marks

Ian Marks
  • Guests

Posted 10 October 2006 - 01:04 PM

As these cameras have been out of production for 40+ years, you'll have to rig something up. If I may suggest a cheap alternative, scour Ebay for a "Sailwind" or similar bellows-type lens shade for medium format cameras. These accept slide-in filters and make a pretty good starting point for a home-made matte box. They're square, of course, but you can cut a mask with an opening in the correct aspect ratio for 16mm and slide it into the front of the bellows. Hope this helps.
  • 0



Aerial Filmworks

Gamma Ray Digital Inc

Technodolly

Tai Audio

Rig Wheels Passport

Broadcast Solutions Inc

Visual Products

Paralinx LLC

rebotnix Technologies

CineLab

CineTape

Glidecam

Ritter Battery

The Slider

FJS International, LLC

Abel Cine

Media Blackout - Custom Cables and AKS

Metropolis Post

Willys Widgets

CineLab

Willys Widgets

rebotnix Technologies

Glidecam

Gamma Ray Digital Inc

Aerial Filmworks

FJS International, LLC

The Slider

Technodolly

Broadcast Solutions Inc

Metropolis Post

Rig Wheels Passport

Visual Products

Media Blackout - Custom Cables and AKS

Ritter Battery

CineTape

Paralinx LLC

Tai Audio

Abel Cine