Jump to content


Photo

Arri Bridgeplates...


  • Please log in to reply
3 replies to this topic

#1 Chris_Burket

Chris_Burket
  • Basic Members
  • PipPip
  • 77 posts
  • Other

Posted 14 December 2006 - 12:42 AM

Are all Arri cameras since the IIc standardized to work with any modern Arri Bridgeplate? Can you use a BP-4 or BP-9 with the IIc flatbase?
  • 0

#2 Leo Anthony Vale

Leo Anthony Vale
  • Basic Members
  • PipPipPipPip
  • 2010 posts
  • Other
  • Pittsburgh PA

Posted 14 December 2006 - 04:18 PM

Are all Arri cameras since the IIc standardized to work with any modern Arri Bridgeplate? Can you use a BP-4 or BP-9 with the IIc flatbase?


Which flatbase?

I think the Bridgeplate came out after the IIC was discontinued & replaced by the 35III.

The CEI motorbase, which is not an Arri product, ought to fit. But anything made prior to the bridgeplate...nah.

Edited by Leo Anthony Vale, 14 December 2006 - 04:20 PM.

  • 0

#3 Brian Drysdale

Brian Drysdale
  • Basic Members
  • PipPipPipPip
  • 5070 posts
  • Cinematographer

Posted 14 December 2006 - 05:44 PM

Which flatbase?

I think the Bridgeplate came out after the IIC was discontinued & replaced by the 35III.

The CEI motorbase, which is not an Arri product, ought to fit. But anything made prior to the bridgeplate...nah.


You can get a flat base for the IIC with the motor is mounted on the side of the camera rather than underneath. It was commonly used when the 11C was used on a Steadicam.

I've used a Bridgeplate on a 11C, but I can't recall any riser details.
  • 0

#4 Leo Anthony Vale

Leo Anthony Vale
  • Basic Members
  • PipPipPipPip
  • 2010 posts
  • Other
  • Pittsburgh PA

Posted 15 December 2006 - 02:30 PM

You can get a flat base for the IIC with the motor is mounted on the side of the camera rather than underneath. It was commonly used when the 11C was used on a Steadicam.

I've used a Bridgeplate on a 11C, but I can't recall any riser details.


The ECE (Technovision) flat base is the thinnest. The motor mounts vertically. It would need an adaptor/riser.
Something like the Cine60 might be too thick.
  • 0


Opal

CineLab

Tai Audio

Aerial Filmworks

rebotnix Technologies

Abel Cine

Media Blackout - Custom Cables and AKS

Broadcast Solutions Inc

The Slider

Rig Wheels Passport

Ritter Battery

CineTape

Technodolly

Willys Widgets

FJS International, LLC

Visual Products

Paralinx LLC

Gamma Ray Digital Inc

Glidecam

Wooden Camera

Metropolis Post

CineLab

Willys Widgets

rebotnix Technologies

Metropolis Post

Glidecam

The Slider

Visual Products

Gamma Ray Digital Inc

Abel Cine

FJS International, LLC

Aerial Filmworks

Rig Wheels Passport

Technodolly

Paralinx LLC

Media Blackout - Custom Cables and AKS

CineTape

Opal

Tai Audio

Broadcast Solutions Inc

Wooden Camera

Ritter Battery