Jump to content


Photo

Camera Mount help


  • Please log in to reply
No replies to this topic

#1 Melanie Dean

Melanie Dean

    New

  • Basic Members
  • Pip
  • 6 posts
  • Other

Posted 02 May 2007 - 04:45 PM

I am having issues trying to mount small hand-held cameras to the interior of the vehicle I want to use. The cameras are little JVC Everios that weigh .89 lbs (with the small battery attached). At first, I used The Cleat vacuum mount I found online, but there was some issues with harmonic vibration that would turn the cameras off.

So I upgraded to The Gripper... at first it worked but then once I start going... the cameras would cut off (too much vibration).

I figured I'd keep going trial and error until I found the right one, but I have so little expertise I figured it would be better to grovel at everyone's feet for some much needed advice :)


My goal is to have a total of 5 camera mounted in the SUV (driver, driver side, two rear passengers and one in the center to capture everyone). Any ideas or suggestions would be really really really grateful.

Thanks!!!
Melanie
  • 0


Opal

CineTape

Wooden Camera

Visual Products

Aerial Filmworks

Willys Widgets

The Slider

Gamma Ray Digital Inc

FJS International, LLC

Ritter Battery

Broadcast Solutions Inc

Tai Audio

Metropolis Post

rebotnix Technologies

Abel Cine

Rig Wheels Passport

Media Blackout - Custom Cables and AKS

Glidecam

CineLab

Technodolly

Paralinx LLC

Abel Cine

Tai Audio

rebotnix Technologies

Wooden Camera

Rig Wheels Passport

Opal

Glidecam

Visual Products

CineLab

The Slider

Broadcast Solutions Inc

Ritter Battery

Aerial Filmworks

CineTape

Media Blackout - Custom Cables and AKS

Willys Widgets

Metropolis Post

Gamma Ray Digital Inc

Technodolly

Paralinx LLC

FJS International, LLC