Jump to content


Photo

BEALA motor


  • Please log in to reply
7 replies to this topic

#1 Jean-Louis Seguin

Jean-Louis Seguin
  • Basic Members
  • PipPipPipPip
  • 719 posts
  • Other
  • Montreal, Canada

Posted 26 September 2007 - 03:32 PM

I have an Eclair NPR camera with a BEALA motor that seem to have a problem. The motor run only on variable speed no matter what position the interior/exterior switch is set to. It doesn't seem to run at crystal sync speed.

Has any one ever seen this problem and could anyone recommend the best technician who is familiar with these old motors.

Thanks.
Jean-Louis
  • 0

#2 David Auner aac

David Auner aac
  • Sustaining Members
  • 1117 posts
  • Cinematographer
  • Los Angeles

Posted 26 September 2007 - 03:37 PM

Has any one ever seen this problem and could anyone recommend the best technician who is familiar with these old motors.


Where are you located?

Cheers, Dave
  • 0

#3 Jean-Louis Seguin

Jean-Louis Seguin
  • Basic Members
  • PipPipPipPip
  • 719 posts
  • Other
  • Montreal, Canada

Posted 28 September 2007 - 01:42 PM

Where are you located?

Cheers, Dave



Montreal, Canada
  • 0

#4 David Auner aac

David Auner aac
  • Sustaining Members
  • 1117 posts
  • Cinematographer
  • Los Angeles

Posted 07 October 2007 - 10:12 AM

Montreal, Canada


You could try Bernie O'Doherty of Super16 Inc. who is on the boards as well. He's an expert on NPRs. And of course you could ask Clive Tobin our local motor expert :D.

Cheers, Dave
  • 0

#5 Clive Tobin

Clive Tobin
  • Basic Members
  • PipPipPipPip
  • 402 posts
  • Industry Rep
  • Spokane Valley, WA, USA

Posted 07 October 2007 - 02:41 PM

...you could ask Clive Tobin our local motor expert...


Thanks but we are only offering service on the motors we have built ourselves. We are swamped with orders for our TVT telecine machines. Anyway we never had any service instructions for the Beala motors, and they made frequent undocumented design changes. Cheers,
  • 0

#6 David Auner aac

David Auner aac
  • Sustaining Members
  • 1117 posts
  • Cinematographer
  • Los Angeles

Posted 07 October 2007 - 02:52 PM

Thanks but we are only offering service on the motors we have built ourselves. We are swamped with orders for our TVT telecine machines. Anyway we never had any service instructions for the Beala motors, and they made frequent undocumented design changes. Cheers,


Hi Clive, bad luck. I figured you might have some idea. Good to hear that your TVT machine sales are coming along. Have fun fulfilling all them orders!

Cheers, Dave
  • 0

#7 Jean-Louis Seguin

Jean-Louis Seguin
  • Basic Members
  • PipPipPipPip
  • 719 posts
  • Other
  • Montreal, Canada

Posted 09 October 2007 - 11:00 AM

You could try Bernie O'Doherty of Super16 Inc. who is on the boards as well. He's an expert on NPRs. And of course you could ask Clive Tobin our local motor expert :D.

Cheers, Dave




Thanks to all for the information.

Jean-Louis
  • 0

#8 Robert Glenn

Robert Glenn
  • Basic Members
  • PipPipPip
  • 247 posts
  • Other

Posted 11 October 2007 - 10:26 AM

AZ spectrum services Eclair Motors I believe
  • 0


Metropolis Post

Media Blackout - Custom Cables and AKS

Visual Products

Rig Wheels Passport

Technodolly

FJS International, LLC

Paralinx LLC

CineTape

Abel Cine

Ritter Battery

Glidecam

Willys Widgets

Wooden Camera

The Slider

Tai Audio

Aerial Filmworks

Gamma Ray Digital Inc

CineLab

Opal

rebotnix Technologies

Broadcast Solutions Inc

Media Blackout - Custom Cables and AKS

Opal

Technodolly

Broadcast Solutions Inc

Paralinx LLC

Aerial Filmworks

CineLab

Willys Widgets

rebotnix Technologies

Visual Products

Wooden Camera

Abel Cine

Gamma Ray Digital Inc

Ritter Battery

The Slider

Glidecam

Metropolis Post

CineTape

Rig Wheels Passport

Tai Audio

FJS International, LLC