Jump to content


Photo

I believe video camera needs new drum heads


  • Please log in to reply
2 replies to this topic

#1 Brendan Maroney

Brendan Maroney
  • Basic Members
  • PipPip
  • 12 posts
  • Student
  • Freehold, NJ

Posted 23 April 2008 - 07:40 PM

The Samsung SCD107 i got a while back, and never fixed, has caught my eye again, and I'd like to get it fixed. The playback and recording is real screwy and from what i read sounds like a drum head problem. How would I go about getting this repaired? I am located in Central Jersey.

Thanks in advance,
Brendan
  • 0

#2 Frank Barrera

Frank Barrera
  • Sustaining Members
  • 464 posts
  • Cinematographer
  • Los Angeles, CA

Posted 23 April 2008 - 09:58 PM

The Samsung SCD107 i got a while back, and never fixed, has caught my eye again, and I'd like to get it fixed. The playback and recording is real screwy and from what i read sounds like a drum head problem. How would I go about getting this repaired? I am located in Central Jersey.

Thanks in advance,
Brendan

Call Samsung.
  • 0

#3 Walter Graff

Walter Graff
  • Sustaining Members
  • 1334 posts
  • Other
  • New York City

Posted 23 April 2008 - 10:46 PM

Thought I'd add some info here. Inside your camera is a drum. The drums purpose is to be a medium for the videotape to wrap around. That drum has little rectangular holes on it at varying points. If you look close you'll see that there is a tiny horizontal strip in that hole. Those are the heads. They work by having the drum spin with the tape wrapped around the drum. The heads actually protrude from the drum (measured in microns). They write to the tape as it passes across the heads. Being these heads are merely microns in length, after a while they physically wear out until they no longer make good, clean contact with the tape. That is when you need to replace the heads. In a repair shop there is a small hand held measuring device that attaches to the drum and measures the width of the heads protrusion. Usually a range of micron length from xx-xx is a known safe operating range. When they wear beyond that they need replacing. Prosumer and consumer heads have short lives because the heads are so small. Larger, professional cameras have heads that last much longer due to size and better design. I had a Betacam that went 13 years without a head change with thousands of tapes having been used. I attribute that to using the same Sony tape all the time and luck.
  • 0


CineTape

Paralinx LLC

Opal

Technodolly

Ritter Battery

Abel Cine

Gamma Ray Digital Inc

Metropolis Post

Media Blackout - Custom Cables and AKS

FJS International, LLC

Rig Wheels Passport

rebotnix Technologies

Glidecam

CineLab

Visual Products

Tai Audio

Willys Widgets

Aerial Filmworks

Wooden Camera

Broadcast Solutions Inc

The Slider

rebotnix Technologies

Paralinx LLC

Gamma Ray Digital Inc

FJS International, LLC

Media Blackout - Custom Cables and AKS

CineTape

Willys Widgets

Glidecam

Broadcast Solutions Inc

Rig Wheels Passport

Abel Cine

Aerial Filmworks

The Slider

Metropolis Post

Ritter Battery

Wooden Camera

Visual Products

CineLab

Tai Audio

Opal

Technodolly