Nikon R-10: I need to know something
Posted 11 June 2009 - 07:25 AM
Will the camera recognize the t-64 and D-100 automatically without adjusting the aperture to compensate? Thanks.
Posted 11 June 2009 - 08:44 AM
The new Plus-X? Aren't there labs that can now override and process it at the normal 50 again? Because the new speed rating is actually just a push because they were lazy when designing the new chemistry.
Can't you manually override?
I do know that, with B&W, you do not want a correction filter swinging into place, you just want to overrate a third of a stop and shoot without filtration (as film is less sensitive to the more ruddy tungsten illumination).
Posted 11 June 2009 - 10:42 PM
I'm not sure with your camera what it'll do. I'm familiar with E64T, but to what are you referring when you are talking about D100?
The Nikon R10 can read the 64T notch so it should expose correctly assuming the lightmeter is still working.
I'm pretty sure it can read the 100D notch too, but you may have to check that.
Posted 12 June 2009 - 12:52 AM
With the Wittnerchrome 100 ( Ektachrome 100 ) you have to close the aperture by 2/3 steps,
With the Wittnerchrome V50 ( Velvia ) the same .
If you put in the filter-key, there is no difference, the aperture doesn`t change.
I don`t know about Spectra films etc.
At the Nikon R-10 you can easily close the aperture at the side of the camera ( for all shootings ).