Jump to content


Photo

Tightening Arri cam lite mag


  • Please log in to reply
3 replies to this topic

#1 Daniel Miranda

Daniel Miranda
  • Basic Members
  • PipPip
  • 18 posts
  • 2nd Assistant Camera

Posted 26 September 2009 - 12:25 AM

Hi everyone, i have a doubt, why if i tighten too much a arricam lite mag i will get an scrachet material, and what happend if i tighten too much an arriflex 435es mag?

Thanks for your help.
  • 0

#2 Chris Keth

Chris Keth
  • Sustaining Members
  • 4427 posts
  • 1st Assistant Camera
  • Los Angeles

Posted 26 September 2009 - 04:45 PM

Hi everyone, i have a doubt, why if i tighten too much a arricam lite mag i will get an scrachet material, and what happend if i tighten too much an arriflex 435es mag?

Thanks for your help.


Tighten what on an arricam LT mag?
  • 0

#3 Mike Panczenko

Mike Panczenko
  • Basic Members
  • PipPipPipPip
  • 324 posts
  • 2nd Assistant Camera
  • Philadelphia, USA

Posted 27 September 2009 - 03:14 PM

Tighten what on an arricam LT mag?


If I'm understanding correctly, I think you are asking if you wind the takeup extremely tightly, so that it is extremely highly tensioned, why is it scratching? You are not supposed to wind with so much tension- in theory it can cause cinch marks or other scratching from rubbing against itself, but I also have not ever seen scratching that could be linked to overly tensioning the takeup. What stock are you shooting with? I have had worse scratching issues with certain stocks than with others. Are you shooting in the cold? Certain circumstances can cause technical issues to exist in areas where there wouldn't normally be.

Edited by Mike Panczenko, 27 September 2009 - 03:15 PM.

  • 0

#4 Daniel Miranda

Daniel Miranda
  • Basic Members
  • PipPip
  • 18 posts
  • 2nd Assistant Camera

Posted 27 September 2009 - 08:25 PM

ohhh thanks, sorry my english is so bad, :unsure: well i was shooting with 5207 250D kodak Vision 3, it was a sunny day. Well i got nervous 'cause i read on an Arri user manual that if you over tighten the mag you will get scratched, it was an Arricam St mag.

Well thanks for your help and time my friend.
  • 0


Metropolis Post

The Slider

Abel Cine

Wooden Camera

Glidecam

Tai Audio

Opal

Willys Widgets

Visual Products

rebotnix Technologies

CineTape

Rig Wheels Passport

Ritter Battery

Broadcast Solutions Inc

Paralinx LLC

Media Blackout - Custom Cables and AKS

Aerial Filmworks

Gamma Ray Digital Inc

CineLab

FJS International, LLC

Technodolly

Aerial Filmworks

Willys Widgets

Ritter Battery

CineLab

Glidecam

Gamma Ray Digital Inc

Abel Cine

Tai Audio

Rig Wheels Passport

Metropolis Post

Visual Products

rebotnix Technologies

Wooden Camera

FJS International, LLC

Paralinx LLC

Broadcast Solutions Inc

Opal

The Slider

CineTape

Technodolly

Media Blackout - Custom Cables and AKS