Jump to content


Photo

PL adapter for Konvas


  • Please log in to reply
4 replies to this topic

#1 Nosov Viktor

Nosov Viktor
  • Basic Members
  • PipPip
  • 19 posts
  • Cinematographer
  • Saint Petersburg Russia

Posted 06 December 2009 - 02:00 PM

PL adapter for Konvas but for 100 % of a warranty, the specialist should
receive camera for operation. Only body, without the view finder.
The time of fabrication and installation + adjustment (check) on a
optical bench with camera will be a maxima 10 working
days. PL adapters will be from stainless steel.
I have decided to notify my new email address and my new site -
PL and BNCR adapters for LOMO and CKBK lenses
http://www.spbsale.com.
  • 0

#2 Stephen Smith

Stephen Smith
  • Basic Members
  • PipPip
  • 73 posts
  • Student
  • UK

Posted 06 December 2009 - 02:41 PM

PL adapter for Konvas but for 100 % of a warranty, the specialist should
receive camera for operation. Only body, without the view finder.
The time of fabrication and installation + adjustment (check) on a
optical bench with camera will be a maxima 10 working
days. PL adapters will be from stainless steel.
I have decided to notify my new email address and my new site -
PL and BNCR adapters for LOMO and CKBK lenses
http://www.spbsale.com.


Hello,
How much do you charge for OCT 19 to PL mount conversion (would be probably 22,28,35,50 and 75mm lenses, they don't appear to have the 4 screws to fit the adaptor myself as described on your website) Is it possible to remove the focus gears from the lenses? as they stick out a long way and bash the viewfinder on the camera i am planning to use the lenses with?

thanks
Stephen
  • 0

#3 Nosov Viktor

Nosov Viktor
  • Basic Members
  • PipPip
  • 19 posts
  • Cinematographer
  • Saint Petersburg Russia

Posted 06 December 2009 - 03:05 PM

Hello,
How much do you charge for OCT 19 to PL mount conversion (would be probably 22,28,35,50 and 75mm lenses, they don't appear to have the 4 screws to fit the adaptor myself as described on your website) Is it possible to remove the focus gears from the lenses? as they stick out a long way and bash the viewfinder on the camera i am planning to use the lenses with?

thanks
Stephen

Hello Stephen,
1. Cost of installation PL adapter on miscellaneous lenses are different.
For a precise assessment of works, the specialist should look on the each lens OCT 19 from above and sideways.
Please send a photos (realrus@spbsale.com). I shall send cost.
So it will be better for all of us. Can be, that of one or several lenses it is not necessary to dispatch in St Petersburg, Russia.
2. I think there are no problems, for the specialist to remove focus gears from lenses.
He also can install other, if it is necessary.
He precisely will tell, when will see fotos.
Thank you.
Viktor.
  • 0

#4 Stephen Smith

Stephen Smith
  • Basic Members
  • PipPip
  • 73 posts
  • Student
  • UK

Posted 06 December 2009 - 03:44 PM

Hello Stephen,
1. Cost of installation PL adapter on miscellaneous lenses are different.
For a precise assessment of works, the specialist should look on the each lens OCT 19 from above and sideways.
Please send a photos (realrus@spbsale.com). I shall send cost.
So it will be better for all of us. Can be, that of one or several lenses it is not necessary to dispatch in St Petersburg, Russia.
2. I think there are no problems, for the specialist to remove focus gears from lenses.
He also can install other, if it is necessary.
He precisely will tell, when will see fotos.
Thank you.
Viktor.

Thanks for this information, i will send an email.
cheers
  • 0

#5 Olex Kalynychenko

Olex Kalynychenko
  • Basic Members
  • PipPipPipPip
  • 868 posts
  • Cinematographer
  • Dnepropetrovsk, Ukraine

Posted 16 December 2009 - 05:44 AM

Hello,
How much do you charge for OCT 19 to PL mount conversion (would be probably 22,28,35,50 and 75mm lenses, they don't appear to have the 4 screws to fit the adaptor myself as described on your website) Is it possible to remove the focus gears from the lenses? as they stick out a long way and bash the viewfinder on the camera i am planning to use the lenses with?

thanks
Stephen

OCT-19 LOMO lenses have have a few different version of body.
You told about lens with 4 screws at rear side, this is last editions of MKBK lenses or Ekran fast series.
The early version of body of lenses had part with irremovable lens mount.

About gears, LOMO lenses can have Arri standard gear ( first versions of Konvas-2M lenses ) and Kinor-35 H gears ( lenses from set of Kinor-35H)

I agree of Viktor about idea to inspect of version of body of lens by picture before answer about price of lens mount upgrade.

And, you need know, what kinds of focus gear you wish use.
A some LOMO lenses have removable focus gear, a some not, and need upgrade of body's part.
  • 0


Opal

FJS International, LLC

rebotnix Technologies

Media Blackout - Custom Cables and AKS

Abel Cine

Technodolly

CineLab

Aerial Filmworks

Paralinx LLC

Glidecam

Willys Widgets

Metropolis Post

Broadcast Solutions Inc

Wooden Camera

Gamma Ray Digital Inc

Visual Products

Ritter Battery

Tai Audio

The Slider

Rig Wheels Passport

CineTape

Wooden Camera

Metropolis Post

Technodolly

Aerial Filmworks

CineTape

Media Blackout - Custom Cables and AKS

CineLab

The Slider

Paralinx LLC

Ritter Battery

Abel Cine

Tai Audio

Broadcast Solutions Inc

Willys Widgets

Opal

Gamma Ray Digital Inc

Visual Products

Rig Wheels Passport

rebotnix Technologies

Glidecam

FJS International, LLC