Jump to content


Photo

Kinor 35H gate


  • Please log in to reply
3 replies to this topic

#1 daniel mahlknecht

daniel mahlknecht
  • Basic Members
  • PipPipPip
  • 190 posts
  • Camera Operator
  • Italy - South Tyrol

Posted 17 February 2010 - 09:56 AM

Hi everybody.
I have found, that the gate in my kinor 35H has a slide, that is similar to the wratten filter holders of Bolex cameras. Is this slide really meant to place filters into the gate?
How recomendable is it to use it for filters, could this alter flange focus distance or facilitate dirt to collect in the gate?

Also I'm still looking foe an anamorphic Film gate and ground glass for the Kinor 35H, if anyone is selling one. Actually I sent these days my 1:1,66 gate to have it modified for anamorphic, but I still can stop this from being done.

thanks
Daniel
  • 0

#2 Olex Kalynychenko

Olex Kalynychenko
  • Basic Members
  • PipPipPipPip
  • 868 posts
  • Cinematographer
  • Dnepropetrovsk, Ukraine

Posted 17 February 2010 - 01:07 PM

Hi everybody.
I have found, that the gate in my kinor 35H has a slide, that is similar to the wratten filter holders of Bolex cameras. Is this slide really meant to place filters into the gate?


Yes, This is slids for setup of Wratten gelatin filters inside holder.
All Ok, this work fine.


Actually I sent these days my 1:1,66 gate to have it modified for anamorphic, but I still can stop this from being done.


You call of 1.66 film gate of film gate with mark " k" and with size of film gate 22,4 x 13,35 mm ?
You sure, what you can upgrade of " K" film gate on anamorphic ?
As for me, this is do not posible, because, the "k" film gate do not have free surface for cut of film gate on size 18,6 x 22,1 mm ( anamorphic ).

If you send me letter on olex.camera@gmail.com i can send you a detailed pictures with size.

As of my calculation, the film gate " H" ( normal ) can be upgrade on A anamorphic.
  • 0

#3 daniel mahlknecht

daniel mahlknecht
  • Basic Members
  • PipPipPip
  • 190 posts
  • Camera Operator
  • Italy - South Tyrol

Posted 17 February 2010 - 01:25 PM

You call of 1.66 film gate of film gate with mark " k" and with size of film gate 22,4 x 13,35 mm ?
You sure, what you can upgrade of " K" film gate on anamorphic ?
As for me, this is do not posible, because, the "k" film gate do not have free surface for cut of film gate on size 18,6 x 22,1 mm ( anamorphic ).

If you send me letter on olex.camera@gmail.com i can send you a detailed pictures with size.

As of my calculation, the film gate " H" ( normal ) can be upgrade on A anamorphic.
[/quote]


Hi,
actually it is a “H“, I was convinced it was 1:1.66 but it is 22,4mm x 16mm. So it should work.

thanks
Daniel
  • 0

#4 Olex Kalynychenko

Olex Kalynychenko
  • Basic Members
  • PipPipPipPip
  • 868 posts
  • Cinematographer
  • Dnepropetrovsk, Ukraine

Posted 17 February 2010 - 03:48 PM

actually it is a “H“, I was convinced it was 1:1.66 but it is 22,4mm x 16mm. So it should work.


Yes, Kinor-35H film gate with mark " H" ( normal , academy film gate ) can be upgrade to Anamorphic size. Will need widen film gate to top on 1.3 mm and you will have top spare surface 0.7 mm and
widen to down on 1.3 mm, and down spare surface will have size 1.2 mm.
  • 0


Glidecam

rebotnix Technologies

The Slider

Technodolly

CineLab

CineTape

FJS International, LLC

Paralinx LLC

Media Blackout - Custom Cables and AKS

Tai Audio

Metropolis Post

Rig Wheels Passport

Abel Cine

Visual Products

Broadcast Solutions Inc

Aerial Filmworks

Gamma Ray Digital Inc

New Pro Video - New and Used Equipment

Ritter Battery

Wooden Camera

Willys Widgets

Visual Products

Aerial Filmworks

Gamma Ray Digital Inc

Paralinx LLC

Metropolis Post

Glidecam

Broadcast Solutions Inc

The Slider

Tai Audio

rebotnix Technologies

Rig Wheels Passport

Wooden Camera

Media Blackout - Custom Cables and AKS

Technodolly

FJS International, LLC

New Pro Video - New and Used Equipment

CineTape

CineLab

Willys Widgets

Abel Cine

Ritter Battery