Jump to content


Photo

H8 spindle Adapter


  • Please log in to reply
5 replies to this topic

#1 andrew parrish

andrew parrish
  • Basic Members
  • PipPip
  • 77 posts
  • Other
  • Vancouver, BC

Posted 20 August 2011 - 12:23 PM

Hi All,

I read the earlier thread about an adapter that allows h16 spools to be used on a h8.I've fired off a few email to no avail. If someone can provide me with an example or knows were I can buy some, I can get a few copies machined. ( I would rather just buy them, if possible-machining is a hassle)

Cheers,

AP
  • 0

#2 Simon Wyss

Simon Wyss
  • Basic Members
  • PipPipPipPip
  • 1405 posts
  • Other
  • Basel, Switzerland

Posted 20 August 2011 - 12:55 PM

Did you ask Bolex for H 8 spools? They might have another one or two in the drawer.
  • 0

#3 Tim Carroll

Tim Carroll
  • Sustaining Members
  • 2165 posts
  • Other
  • Chicago, Illinois

Posted 20 August 2011 - 03:04 PM

Hi All,

I read the earlier thread about an adapter that allows h16 spools to be used on a h8.I've fired off a few email to no avail. If someone can provide me with an example or knows were I can buy some, I can get a few copies machined. ( I would rather just buy them, if possible-machining is a hassle)

Cheers,

AP


There used to be a guy who made those many years ago, I guess he has stopped. If you don't find anything in the next couple of weeks, let me know.

Best,
-Tim
  • 0

#4 andrew parrish

andrew parrish
  • Basic Members
  • PipPip
  • 77 posts
  • Other
  • Vancouver, BC

Posted 21 August 2011 - 11:43 PM

There used to be a guy who made those many years ago, I guess he has stopped. If you don't find anything in the next couple of weeks, let me know.

Best,
-Tim


Thanks Tim, if I strike out on an open market source, I'll get back to you.

Ap













'
  • 0

#5 Nicholas Kovats

Nicholas Kovats
  • Basic Members
  • PipPipPipPip
  • 507 posts
  • Cinematographer
  • Shoot film! facebook.com/UltraPan8WidescreenFilm

Posted 29 August 2011 - 02:13 PM

Andrew,

I just ordered a H8 round to square spindle adapter for my UltraPan8 Bolex from Jaakko <jpkurhi@att.net> of www.jkcamera.com. Apparently this is a stock item, i.e. pair of H8 spindle adapter(s) at $22.50 + S/H $8 = $30.50 US (Total Cost).
  • 0

#6 andrew parrish

andrew parrish
  • Basic Members
  • PipPip
  • 77 posts
  • Other
  • Vancouver, BC

Posted 30 August 2011 - 07:08 PM

Thanks Nicholas

Andrew,

I just ordered a H8 round to square spindle adapter for my UltraPan8 Bolex from Jaakko <jpkurhi@att.net> of www.jkcamera.com. Apparently this is a stock item, i.e. pair of H8 spindle adapter(s) at $22.50 + S/H $8 = $30.50 US (Total Cost).


  • 0


CineTape

rebotnix Technologies

Ritter Battery

Technodolly

Wooden Camera

FJS International, LLC

Media Blackout - Custom Cables and AKS

Paralinx LLC

CineLab

The Slider

Rig Wheels Passport

Opal

Tai Audio

Metropolis Post

Visual Products

Willys Widgets

Abel Cine

Gamma Ray Digital Inc

Aerial Filmworks

Broadcast Solutions Inc

Glidecam

Paralinx LLC

Aerial Filmworks

Broadcast Solutions Inc

Media Blackout - Custom Cables and AKS

Metropolis Post

Opal

CineTape

Visual Products

FJS International, LLC

Ritter Battery

rebotnix Technologies

Wooden Camera

Tai Audio

Gamma Ray Digital Inc

Abel Cine

CineLab

Glidecam

Willys Widgets

Technodolly

The Slider

Rig Wheels Passport