Jump to content


Photo

F3 or RED one: greenscreen to FullHD


  • Please log in to reply
No replies to this topic

#1 Krzysiek Maslejak

Krzysiek Maslejak

    New

  • Basic Members
  • Pip
  • 4 posts
  • Cinematographer
  • Warsaw, Poland

Posted 07 June 2012 - 08:41 AM

Hey guys!

As it's my first post, please, be patient and forgiving;)

Next week we're in greenscreen studio. The aim is to record an footage for the visual-effect purpose, which will be displayed on FullHD projectors, in b&w, a human on alpha-cannal (as it will be displayed on trains, like a special layer: a result of final tests you can see on poster here: Posted Image
We have to capture two shots:
1. a child is walking from left side to right in parallel to camera; after 6 meters it is rotating from camera to greenscreen and make few (aim: at least 5) steps; there's no camera movement
2. full figure of child, standing and looking at the camera (on the eyes height); no camera movement

And that two shots thirty times, with another children ;)



Due to the fact I'm still newbie, I have some newbie question, hope that someone will share a piece of advice!;):
1. We can't still decide if that should be F3 of Red ONE. The problem have a financial case of course. Because the final output have to be max 1920x1080, I'm thinking that F3 will be enough. However, there's a possibilty that F3 resolution will not be capable of good green work in first shot in postproduction; is it a big risk, that it'll be hard to key this, due to the fact, that figure in frame will have not enough pixels in movement with full-sized figure on six meters width? Is it worth to get a Red for downscaling from 2K, and having better resolution (remember it's still twice more expensive to rent than F3...)
2. (I'm thinking about Carl Zeiss CP.2 21mm to get all of children way, and have this in sharpness, is it good decision, due to size of greenscreen studio where i have to put the camera at least 4 meters from subject? )

I know that it has to be very good lited!:)

3. If I choose a F3, the project is non-commercial, so... a 503HDV Manfrotto will be able to this project, as I can get this for free? Due to specification, max load is 8kg, F3 with lens should be max 4kg, but I'm afraid of plate (see the next question)
4. Is it worth to record second shots (as above) in vertical? You know, its still possible to arrange F3 vertically and have better resolution. But is the manfrotto plate safe enough for such a indie working?:)
5. can I record on F3 a 4:2:2? I can't get this information. It's due to renting an recocder aja ki pro, which is next money (and still not enough sponsors...) As there is many errors with such a device and they're next expense, is it enough to record right on F3 SxS cards?
And is it possible to record on both devices simultenously, backuppy?

And and and... I know there's a lot of questions there, but every advice will be helpful! Because I feel a little bit mixy with all of this things already!
And that's because really - this project ist worth of work, maybe not so hard, but for a beginning cinematographer...

Thanks a lot in advance!
  • 0


Media Blackout - Custom Cables and AKS

Wooden Camera

Aerial Filmworks

Ritter Battery

Rig Wheels Passport

CineLab

Metropolis Post

rebotnix Technologies

CineTape

Abel Cine

Glidecam

Willys Widgets

Gamma Ray Digital Inc

Paralinx LLC

Tai Audio

Opal

Technodolly

FJS International, LLC

The Slider

Broadcast Solutions Inc

Visual Products

Broadcast Solutions Inc

Ritter Battery

Technodolly

Opal

Media Blackout - Custom Cables and AKS

FJS International, LLC

CineTape

Glidecam

Willys Widgets

Aerial Filmworks

Wooden Camera

Paralinx LLC

Abel Cine

Gamma Ray Digital Inc

Rig Wheels Passport

Metropolis Post

The Slider

Visual Products

CineLab

Tai Audio

rebotnix Technologies