Jump to content


Photo

HIT value


  • Please log in to reply
No replies to this topic

#1 michael abraham

michael abraham
  • Basic Members
  • PipPip
  • 36 posts
  • Other
  • London

Posted 03 July 2012 - 05:48 PM

Hello guys,


I'm going to film a commercial in 3D. I plan to shoot parallel using Qtake or the 3Ality SIP and apply the right value for the HIT. Any advice?
My understanding is to set the value starting to have the cameras perfectly line up then,before apply the interaxial,apply the HIT to have the right percentage related to the screen target.So if the screen target is 13m, the max positive parallax is going to be 0.5% so the HIT has to be about 10 px.I'll shift left and right for 5px each.

Is it the right procedure or someone has a better idea? :unsure:

Thanks for reading


Michele

Edited by michael abraham, 03 July 2012 - 05:48 PM.

  • 0


Rig Wheels Passport

Glidecam

Visual Products

rebotnix Technologies

Gamma Ray Digital Inc

Tai Audio

Media Blackout - Custom Cables and AKS

Willys Widgets

CineTape

Broadcast Solutions Inc

CineLab

The Slider

Abel Cine

Opal

Paralinx LLC

Wooden Camera

FJS International, LLC

Metropolis Post

Technodolly

Aerial Filmworks

Ritter Battery

The Slider

Media Blackout - Custom Cables and AKS

Rig Wheels Passport

Opal

Metropolis Post

Technodolly

rebotnix Technologies

Aerial Filmworks

Gamma Ray Digital Inc

CineLab

Tai Audio

Visual Products

Glidecam

Willys Widgets

Abel Cine

Broadcast Solutions Inc

CineTape

FJS International, LLC

Wooden Camera

Paralinx LLC

Ritter Battery