Jump to content


Photo

New kid on the block on 37 years old family Canon 1014E

1014E Shuttle Angle

  • Please log in to reply
4 replies to this topic

#1 WWS

WWS

    New

  • Basic Members
  • Pip
  • 2 posts
  • Other

Posted 11 May 2013 - 11:30 PM

My dad gave me his 37 years old Canon 1014E recently as it looks like new, it is a family jewel. I have bought few roll of S8 but never get the chance to try it as there are questions I'm still searching. Glad I found this site! I like to shoot in manual as I want more control on my exposure but the manual got me confuse.

 

Here is my question:

I pull out the manual dial to set manual aperture when I set the Variable Shutter Control Ring to 4 (37.5 degree) do I need to compensate the Two stops in the aperture. Thanks everyone.


  • 0

#2 Maurizio Di Cintio

Maurizio Di Cintio
  • Basic Members
  • PipPip
  • 32 posts
  • Other
  • Italy

Posted 12 May 2013 - 03:16 AM

Hi. It's an excellent camera with an awesome lens. And built like a tank (except for the manual aperture knob which tends to get somewhat flimsy over the years).

 

But when you work with shutter speeds different from the standard, you don't have to compensate manually with such a knob: all you have to do is setting the small selector (located right, next to the speed dial)  to the same number as the shutter control dial: normally it is sets at the red dot (= shutter works at its maximum exposure capability); if you choose to work with half shutter angle, then you select "2" on this small lever; finally you want to choose pos "4" when working with the smallest shutter angle. This way the camera will automatically compensate with bigger iris apertures. Of course you can always switch to manual Iris operation as well like "AE Lock" etc.

 

Have fun!


  • 0

#3 WWS

WWS

    New

  • Basic Members
  • Pip
  • 2 posts
  • Other

Posted 12 May 2013 - 01:43 PM

Thanks Maurizio just to be clear if I'm in manual mode when I pull out the aperture setting and set the pos "4". Now Aperture is manual will I have to manual compensate the shuttle angle at "4". Thanks again. 


  • 0

#4 Maurizio Di Cintio

Maurizio Di Cintio
  • Basic Members
  • PipPip
  • 32 posts
  • Other
  • Italy

Posted 14 May 2013 - 01:24 PM

As long as the manual aperture knob is all the way into the camera and camera is  working in auto mode AND you are using the smallest shutter opening angle WITH the selector set to "4", the camera will compensate automatically. If you want to avoid sudden iris aperture changes, you need to lock that knob by pulling it outward. If you ant to set a specific aperture by yourself, you can do that anyway, anytime by rotating that knob AFTER pulling it out.

 

Hope this helps. 


  • 0

#5 Bill Rodgers

Bill Rodgers
  • Basic Members
  • PipPipPip
  • 135 posts
  • Director
  • London & Sussex UK

Posted 15 May 2013 - 09:51 AM

Your Dad certainly had good taste in Super 8 cameras!

 

 

Mine was quite hard-up in the 70's, so I inherited a Bell & Howell 493 Filmosound 8. 


Edited by Bill Rodgers, 15 May 2013 - 09:52 AM.

  • 0


Glidecam

Media Blackout - Custom Cables and AKS

Broadcast Solutions Inc

New Pro Video - New and Used Equipment

Technodolly

Metropolis Post

Aerial Filmworks

Abel Cine

The Slider

rebotnix Technologies

Rig Wheels Passport

Visual Products

Wooden Camera

Gamma Ray Digital Inc

Tai Audio

Willys Widgets

Ritter Battery

FJS International, LLC

Paralinx LLC

CineTape

CineLab

Aerial Filmworks

Wooden Camera

rebotnix Technologies

Media Blackout - Custom Cables and AKS

CineTape

Tai Audio

Ritter Battery

Gamma Ray Digital Inc

Paralinx LLC

Glidecam

FJS International, LLC

Abel Cine

CineLab

New Pro Video - New and Used Equipment

Technodolly

Broadcast Solutions Inc

Visual Products

Metropolis Post

Willys Widgets

The Slider

Rig Wheels Passport