Jump to content


Photo

Telecine DIY


  • Please log in to reply
9 replies to this topic

#1 Mattias Norberg

Mattias Norberg
  • Basic Members
  • PipPip
  • 24 posts
  • Other

Posted 29 December 2013 - 01:01 AM

here is my telecine in action :)


  • 3

#2 Josh Gladstone

Josh Gladstone
  • Basic Members
  • PipPipPipPip
  • 323 posts
  • Editor
  • Hollywood

Posted 29 December 2013 - 03:39 AM

Looks good! Crazy motor setup! What software are you using? And what hardware do you use to trigger it?
  • 0

#3 Mattias Norberg

Mattias Norberg
  • Basic Members
  • PipPip
  • 24 posts
  • Other

Posted 29 December 2013 - 05:15 AM

Thanks :)

 

in the video i use IC Capture 2.3 you can download it here

http://www.theimagin...port/downloads/

 

software called FireCapture works to you can download it here

http://firecapture.wonderplanets.de/

 

in IC Capture 2.3 and FireCapture you have the option to enable trigger mode

 

the hardware and trigger

i use a hall sensor and i have a magnet glued inside the projector on the wheel so every time the wheel rotate and comes near the hall sensor it output 5v to the camera trigger

 

here is a picture of the wheel and hall sensor

9037579680_a4d5fb6ec1_h.jpg

 

here you can see the whole trigger cabel with hall sensor

11301553614_860b330748_h.jpg

 

here is a better picture of the hall sensor

11301495415_d67ed94d97_h.jpg

 

here is the wiring diagram to build the trigger and i did copy it from here http://www.cine2digits.co.uk/

10312776126_5dfa59a53f_h.jpg


  • 0

#4 Josh Gladstone

Josh Gladstone
  • Basic Members
  • PipPipPipPip
  • 323 posts
  • Editor
  • Hollywood

Posted 29 December 2013 - 11:05 AM

So cool! Thanks for posting all the pictures. I was using a physical lever switch to trigger my scanner before, but I was planning to try out a light sensor with laser or led setup for the next version. The hall sensor is cool though, I might have to think about that.
  • 0

#5 Mattias Norberg

Mattias Norberg
  • Basic Members
  • PipPip
  • 24 posts
  • Other

Posted 29 December 2013 - 03:34 PM

i have seen this video that they use laser sensor called sensopart PS-L4 i think

 

 

 

i did see in some other picture he have placed the laser sensor diagonally i guess it´s because for example let's say if you look out of a window and you stand much more on the other side of the window then the window is not so wide anymore :)

so i guess it get´s more accurate for the sensor to detect sprocket hole if the laser sensor hits the sprocket hole diagonally


Edited by Mattias Norberg , 29 December 2013 - 03:36 PM.

  • 0

#6 Josh Gladstone

Josh Gladstone
  • Basic Members
  • PipPipPipPip
  • 323 posts
  • Editor
  • Hollywood

Posted 30 December 2013 - 07:01 PM

Yeah, the Muller was pretty much my inspiration from the beginning; the thing's a work of art! So that's why the laser was in my head. I got this of Amazon for $8 the other day, so I'll give that a shot. I'm not exactly sure if I'll use a laser and shoot it through a perf, or just mount it behind the shutter to let me know when the shutter's clear. I'll see once my new projector gets here. Fun to play with though!


Edited by Josh Gladstone, 30 December 2013 - 07:02 PM.

  • 0

#7 Mattias Norberg

Mattias Norberg
  • Basic Members
  • PipPip
  • 24 posts
  • Other

Posted 31 December 2013 - 05:44 AM

i have been thinking my self to buy a Arduino or Raspberry Pi and a stepper motor and see how it all works

the light sensor you did link was compatible with arduino :)


  • 0

#8 Josh Gladstone

Josh Gladstone
  • Basic Members
  • PipPipPipPip
  • 323 posts
  • Editor
  • Hollywood

Posted 31 December 2013 - 09:43 AM

That's exactly what I did. Arduino+stepper motor. The arduino is so cool. Now I have it running the motor, the LEDs, the trigger, etc. I definitely encourage you to get one. And I had never used one before or programmed anything like that before, so its definitely doable. And it was actually a lot of fun and really rewarding getting that thing working.
  • 0

#9 Phil Rhodes

Phil Rhodes
  • Sustaining Members
  • 12303 posts
  • Other

Posted 31 December 2013 - 11:57 AM

Lots of things are described as "compatible with arduino" - all that really means is that it's a 5V logic device.

 

P


  • 1

#10 Mattias Norberg

Mattias Norberg
  • Basic Members
  • PipPip
  • 24 posts
  • Other

Posted 01 January 2014 - 01:20 PM

ok sound good i guess i have to buy one :)

 

Phil ok then i know


  • 1


rebotnix Technologies

Technodolly

CineLab

Tai Audio

The Slider

Metropolis Post

Visual Products

FJS International, LLC

Wooden Camera

Paralinx LLC

Broadcast Solutions Inc

Abel Cine

Willys Widgets

Glidecam

Ritter Battery

Rig Wheels Passport

Gamma Ray Digital Inc

New Pro Video - New and Used Equipment

CineTape

Aerial Filmworks

Media Blackout - Custom Cables and AKS

Willys Widgets

The Slider

Technodolly

Glidecam

Aerial Filmworks

Paralinx LLC

Wooden Camera

Tai Audio

Media Blackout - Custom Cables and AKS

Gamma Ray Digital Inc

Ritter Battery

Metropolis Post

CineTape

Visual Products

Broadcast Solutions Inc

New Pro Video - New and Used Equipment

Abel Cine

CineLab

rebotnix Technologies

FJS International, LLC

Rig Wheels Passport