Jump to content


Photo

ARRI 2C Manual


  • Please log in to reply
6 replies to this topic

#1 Bill DiPietra

Bill DiPietra
  • Sustaining Members
  • 2339 posts
  • Cinematographer
  • New York City

Posted 16 March 2014 - 10:17 AM

Does anyone know where I might be able to find the manual for this camera?  Might it be available online somewhere?

 

Also, I don't know much about the ARRI 35mm cameras.  Is the 2C a 4-perf camera? (I'm guessing yes, due to its age.)

 

Thanks for any help.


  • 0

#2 James Compton

James Compton
  • Basic Members
  • PipPipPipPip
  • 320 posts
  • Cinematographer

Posted 16 March 2014 - 12:25 PM

 Contact me via PM and  I will send you the PDF.

 

ALL ARRI 35mm cameras have been factory 4 -perf until 3-PERF became popular in the 1990's

for television productions.


  • 0

#3 Bill DiPietra

Bill DiPietra
  • Sustaining Members
  • 2339 posts
  • Cinematographer
  • New York City

Posted 16 March 2014 - 03:01 PM

Hi James.  Thanks for the response.  I tried to PM you but it says you can't receive any more messages right now.  Full inbox, perhaps?...


  • 0

#4 Dom Jaeger

Dom Jaeger
  • Basic Members
  • PipPipPipPip
  • 1810 posts
  • Other
  • Melbourne, Australia

Posted 16 March 2014 - 10:07 PM

Bill,
there are online IIC manuals available in several places. Try:

http://www.kevinzani...5IIC_manual.pdf
or
http://www.kinokamer...5IIC_manual.pdf

Most IICs will be 4-perf, a very few modified to 3-perf, and occasionally you'll find a Techniscope 2-perf model. Most will not be S35 capable either.

PS I would disregard the manual when it suggests trimming the first 20 perfs off a leader for loading the mags, not necessary IMHO
  • 0

#5 Bill DiPietra

Bill DiPietra
  • Sustaining Members
  • 2339 posts
  • Cinematographer
  • New York City

Posted 16 March 2014 - 11:42 PM

Thanks a lot, Dom.


  • 0

#6 Phillip Mosness

Phillip Mosness
  • Basic Members
  • PipPip
  • 97 posts
  • Other

Posted 18 March 2014 - 11:36 PM

Out of curiosity, is the reason most aren't capable of super 35 because of the re-centering of the lens mount (turret or PL) or a gate issue?


  • 0

#7 Dom Jaeger

Dom Jaeger
  • Basic Members
  • PipPipPipPip
  • 1810 posts
  • Other
  • Melbourne, Australia

Posted 19 March 2014 - 02:08 AM

I think the biggest issue was if you re-centred the mount certain wide angle lenses would hit the mirror, since the mirror is on the side where you need to shift the optical axis over to. Other things like the viewfinder optics not normally covering Super and the claw recess in the gate being too close to the frame edge were also problematic.
  • 0


CineLab

Metropolis Post

CineTape

Visual Products

Ritter Battery

Abel Cine

Aerial Filmworks

Media Blackout - Custom Cables and AKS

Technodolly

Wooden Camera

Gamma Ray Digital Inc

Willys Widgets

The Slider

rebotnix Technologies

FJS International, LLC

Glidecam

Paralinx LLC

Rig Wheels Passport

Broadcast Solutions Inc

New Pro Video - New and Used Equipment

Tai Audio

rebotnix Technologies

CineLab

Abel Cine

Tai Audio

Wooden Camera

The Slider

Willys Widgets

FJS International, LLC

Aerial Filmworks

Paralinx LLC

Broadcast Solutions Inc

Glidecam

Ritter Battery

Metropolis Post

Gamma Ray Digital Inc

Technodolly

New Pro Video - New and Used Equipment

Rig Wheels Passport

Visual Products

CineTape

Media Blackout - Custom Cables and AKS