Jump to content


Photo

Beaulieu 6008 Schneider-Kreuznach 6-70 zoom


  • Please log in to reply
7 replies to this topic

#1 Perry Paolantonio

Perry Paolantonio
  • Basic Members
  • PipPipPipPip
  • 555 posts
  • Other
  • Boston, MA

Posted 01 July 2014 - 12:33 PM

It's my understanding that this is a C-mount lens once you remove the motorized zoom control box that's attached to it, along with the larger ring screw mount. I'm wondering if anyone has instructions on how to do this?

 

I've taken out the three set screws that hold the collar that the zoom control seems to be attached to, and I was hoping the whole thing might slide off or unscrew, but it's not happening. So, I feel like I'm missing something.

 

Any suggestions?

 

Thanks,

 

-perry


Edited by Perry Paolantonio, 01 July 2014 - 12:35 PM.

  • 0

#2 Jean-Louis Seguin

Jean-Louis Seguin
  • Basic Members
  • PipPipPipPip
  • 762 posts
  • Other
  • Montreal, Canada

Posted 01 July 2014 - 01:26 PM

There are four screws; you've overlooked one

Jean-Louis
  • 0

#3 Perry Paolantonio

Perry Paolantonio
  • Basic Members
  • PipPipPipPip
  • 555 posts
  • Other
  • Boston, MA

Posted 01 July 2014 - 01:42 PM

Four set screws? One must be underneath the zoom motor then, because I only see three on that collar.

 

...any idea how I get the zoom motor off without a hammer?


  • 0

#4 andy oliver

andy oliver
  • Sustaining Members
  • 266 posts
  • Other
  • uk

Posted 01 July 2014 - 03:58 PM

are you sure its a c=mount lens, once the LCU is removed? we are talking about a 6008 with 6-70 lens with a larger mounting ring that screws to camera body? Pretty sure my late 6008 with 6-70, the 6-70 had no c=mount thread.


  • 0

#5 Perry Paolantonio

Perry Paolantonio
  • Basic Members
  • PipPipPipPip
  • 555 posts
  • Other
  • Boston, MA

Posted 01 July 2014 - 04:14 PM

Hmm. I think you're right. It looked like the back element could be c-mount, surrounded by a non-threaded stainless steel ring, but now that I measure it with my digital calipers, it's just smaller than the diameter of a c-mount. So I guess it's on to plan B!

 

Thanks,

 

-perry


  • 0

#6 Jean-Louis Seguin

Jean-Louis Seguin
  • Basic Members
  • PipPipPipPip
  • 762 posts
  • Other
  • Montreal, Canada

Posted 01 July 2014 - 06:34 PM

Slide the macro lever over and you'll see the 4th screw.

JL
  • 0

#7 Jean-Louis Seguin

Jean-Louis Seguin
  • Basic Members
  • PipPipPipPip
  • 762 posts
  • Other
  • Montreal, Canada

Posted 01 July 2014 - 08:44 PM

Sorry, I misread the post. Thought it was a 5008.

JL


  • 0

#8 Andries Molenaar

Andries Molenaar
  • Basic Members
  • PipPipPipPip
  • 691 posts
  • Industry Rep
  • Amsterdam

Posted 02 July 2014 - 04:58 AM

Hmm. I think you're right. It looked like the back element could be c-mount, surrounded by a non-threaded stainless steel ring, but now that I measure it with my digital calipers, it's just smaller than the diameter of a c-mount. So I guess it's on to plan B!

 

Thanks,

 

-perry

It doesn't have a screwthread. And the LCU is fixed to the tube too.


  • 0


Media Blackout - Custom Cables and AKS

CineLab

Tai Audio

CineTape

rebotnix Technologies

Broadcast Solutions Inc

Metropolis Post

Glidecam

Aerial Filmworks

New Pro Video - New and Used Equipment

Wooden Camera

Technodolly

Ritter Battery

FJS International, LLC

Rig Wheels Passport

The Slider

Willys Widgets

Paralinx LLC

Abel Cine

Visual Products

Gamma Ray Digital Inc

Paralinx LLC

Willys Widgets

Visual Products

Abel Cine

The Slider

Technodolly

Ritter Battery

Gamma Ray Digital Inc

Glidecam

Wooden Camera

FJS International, LLC

Rig Wheels Passport

Tai Audio

New Pro Video - New and Used Equipment

Aerial Filmworks

CineLab

rebotnix Technologies

Media Blackout - Custom Cables and AKS

Broadcast Solutions Inc

Metropolis Post

CineTape