Jump to content



Photo

Veam connector for Arrisun HMI disassembly


  • Please log in to reply
No replies to this topic

#1 Tom Morrow

Tom Morrow
  • Basic Members
  • PipPip
  • 18 posts
  • Gaffer
  • San Francisco

Posted 18 March 2015 - 10:56 AM

I have found a loose connection around the VEAM connector on my Arrisun 1200 plus head; when I wiggle the cable from the head to the connector, the HMI sometimes blinks off and tries to restart.

 

I'm pretty sure one of the solder joints inside the connector has failed, so I'd like to take off the connector and resolder it.  But I can't figure out how to disssemble the VEAM connector which looks like the left one in this pic:

 

http://www.mldvideo....0/600/image.jpg

 

I can screw off the tension relief on the end but the body stays in place.  It looks it might take an expensive spline tool that I don't have.  I might be better off just bringing this into a service center, but I thought I'd see if anyone knows a DIY way to open this connector?

 


  • 0


Metropolis Post

Glidecam

Wooden Camera

FJS International, LLC

Media Blackout - Custom Cables and AKS

Gamma Ray Digital Inc

Ritter Battery

CineLab

Broadcast Solutions Inc

Abel Cine

New Pro Video - New and Used Equipment

Visual Products

Paralinx LLC

Rig Wheels Passport

Tai Audio

FJS International, LLC

Media Blackout - Custom Cables and AKS

Paralinx LLC

Tai Audio

Rig Wheels Passport

Broadcast Solutions Inc

Gamma Ray Digital Inc

Visual Products

Glidecam

Wooden Camera

New Pro Video - New and Used Equipment

Ritter Battery

CineLab

Abel Cine

Metropolis Post