Jump to content




Photo

Milliken DBM-4c Help

Milliken 16mm Highspeed Help

  • Please log in to reply
1 reply to this topic

#1 Cody Ryan

Cody Ryan

    New

  • Basic Members
  • Pip
  • 4 posts

Posted 12 April 2015 - 04:46 PM

Hi Guys, 

Just picked up this Milliken for $30 figured I give it a shot. Had some questions about the wiring. It has this cable coming out of the front and a Hi Lo Off switch on the back. Haven't seen any of them with this and was wondering if this camera has had any rewiring. Also what they are for. I assume that the cable might be for power if it has been rewired. Thought I check with you guys first before I did anything with it.

 

Thanks Cody

 

Attached Images

  • image1.JPG
  • image2.JPG
  • image3.JPG
  • IMG_2582.JPG

  • 0




#2 Mark Dunn

Mark Dunn
  • Basic Members
  • PipPipPipPip
  • 2182 posts
  • Other
  • London

Posted 13 April 2015 - 04:52 AM

I wonder if the 4-pin was for some kind of lens control. The Hi-Lo switch might be a speed range selector.

IIRC the medium-speed cameras usually have just the one cable for power, control and timing lights. It's the high-speeds that need a separate power inlet for the higher current.

BTW we called up to 500pps medium-speed, not high, so that would cover the Milliken.


Edited by Mark Dunn, 13 April 2015 - 04:56 AM.

  • 0



Aerial Filmworks

Glidecam

rebotnix Technologies

Technodolly

Paralinx LLC

Pro 8mm

Willys Widgets

Abel Cine

Tai Audio

Zylight

CineLab

Rig Wheels Passport

Visual Products

The Slider

Broadcast Solutions Inc

CineTape

Ritter Battery

Broadcast Solutions Inc

rebotnix Technologies

Paralinx LLC

Technodolly

CineLab

Zylight

Abel Cine

Visual Products

Ritter Battery

Glidecam

CineTape

Tai Audio

The Slider

Rig Wheels Passport

Aerial Filmworks

Pro 8mm

Willys Widgets