Jump to content


Photo

Metal Pressure Plate for Super 8 Cartridges.


  • Please log in to reply
8 replies to this topic

#1 Brian Drysdale

Brian Drysdale
  • Basic Members
  • PipPipPipPip
  • 5232 posts
  • Cinematographer

Posted 16 January 2016 - 04:23 AM

This metal plate may be of interest to those concerned about the precision of the plastic pressure plate used on Super 8 film cartridges. You remove it before sending off your film for processing

 

http://www.gkfilm.de...tte/beschr.html


Edited by Brian Drysdale, 16 January 2016 - 04:23 AM.

  • 0

#2 Tyler Purcell

Tyler Purcell
  • Sustaining Members
  • 4188 posts
  • Other
  • Los Angeles

Posted 16 January 2016 - 02:27 PM

Sweet! I always heard of something like this, but never knew where to nab one! :) Thanks for the link!
  • 0

#3 Moises Perez

Moises Perez
  • Basic Members
  • PipPip
  • 55 posts
  • Cinematographer

Posted 17 January 2016 - 10:17 PM

Does it work?

Has anybody used it?

Is it worth the investment?

 

Thanks,

MOY


  • 0

#4 S8 Booster

S8 Booster
  • Basic Members
  • PipPipPip
  • 132 posts
  • Other
  • retired

Posted 17 January 2016 - 11:12 PM

The pressureplate was originally developed to try to correct / compensate for production failures with the kodak cartridges. In the early 2Ks the film jammed, film waved & breathed heavily. The PP did i prove a little apaert from jamming which was a direct assembly failure.

If your camera is worn do not expect euureka experience but it has the potential to improve imperfectio. It eill run a little heavier.

There is some promo clips om thr net somewhere. Check thrm out an see for your self.

Edited by S8 Booster, 17 January 2016 - 11:15 PM.

  • 0

#5 S8 Booster

S8 Booster
  • Basic Members
  • PipPipPip
  • 132 posts
  • Other
  • retired

Posted 17 January 2016 - 11:34 PM

Some "Frame Master" demo klips here:
http://www.andecfilm...o-bildstand.htm
  • 0

#6 S8 Booster

S8 Booster
  • Basic Members
  • PipPipPip
  • 132 posts
  • Other
  • retired

Posted 18 January 2016 - 09:10 AM

Better clip: V200T with and without the "Frame Master": http://www.andecfilm...gs/neg_7274.mpg


  • 0

#7 Brian Drysdale

Brian Drysdale
  • Basic Members
  • PipPipPipPip
  • 5232 posts
  • Cinematographer

Posted 18 January 2016 - 10:00 AM

You have to use your full real name in the forum, it's one of the rules. You have to contact Tim Tyler the site owner to make the change.


  • 0

#8 Anthony Schilling

Anthony Schilling
  • Basic Members
  • PipPipPipPip
  • 1063 posts
  • Camera Operator
  • Portland, OR

Posted 18 January 2016 - 10:26 AM

I have one but haven't used it for a while. The idea is to reduce breathing and jitter, and it does help. The downside is if you're using thicker emulsions like Vision, and your cameras motor isn't working to its full potential, the film may not advance. I had that happen twice, you,re done shooting only to find you still have 50ft of film in the camera.
  • 0

#9 Tyler Purcell

Tyler Purcell
  • Sustaining Members
  • 4188 posts
  • Other
  • Los Angeles

Posted 18 January 2016 - 02:10 PM

Ahh, that makes sense as a lot of pull-down claws aren't designed to pull through that added friction.
  • 0


Gamma Ray Digital Inc

CineTape

Technodolly

New Pro Video - New and Used Equipment

FJS International, LLC

Aerial Filmworks

Willys Widgets

Tai Audio

Visual Products

Paralinx LLC

rebotnix Technologies

Abel Cine

Ritter Battery

Metropolis Post

Wooden Camera

The Slider

Media Blackout - Custom Cables and AKS

CineLab

Broadcast Solutions Inc

Glidecam

Rig Wheels Passport

Metropolis Post

Glidecam

New Pro Video - New and Used Equipment

Aerial Filmworks

Tai Audio

Wooden Camera

Technodolly

FJS International, LLC

Broadcast Solutions Inc

Media Blackout - Custom Cables and AKS

Visual Products

CineLab

The Slider

rebotnix Technologies

Paralinx LLC

Ritter Battery

Gamma Ray Digital Inc

Rig Wheels Passport

Willys Widgets

Abel Cine

CineTape