Jump to content




Photo

Canon autozoom 814 electronic


  • Please log in to reply
1 reply to this topic

#1 pamagar

pamagar

    New

  • Basic Members
  • Pip
  • 2 posts
  • Cinematographer
  • Valencia

Posted 29 April 2016 - 06:17 AM

Hello, hi everyone!

I´m new here.

My name is Pablo and I´m from Spain.

So... I recently bought a Canon Autozoom 814 Electronic and I´ve been shooting with Kodak Vision 500T.

I´m a lil bit lost about how should I shoot it on daylight... Right now I´ve been shooting that cartridge with the variable shutter on number 2 and with the exposure adjustment knob  on 2 too. But... what I have to do with the red pin that is below where you engange the tripod? Let it where it is or put it above where the CCA filter cancellation is?.

I´m shootingh withput lightmeter and my lab told me that is better to over-expose that film...

Also... what I have to do to shoot kodak tri-x correctly with that camera?.

Thanks for your time and sorry about my bad english...

 


  • 0




#2 Richard Tuohy

Richard Tuohy
  • Basic Members
  • PipPipPipPip
  • 471 posts
  • Other
  • Daylesford, Australia

Posted 01 May 2016 - 06:39 PM

Hi Pablo
If you are shooting in daylight then you should leave the red screw where it is. You would only put it in the filter screw hole if you wanted to shoot under tungsten light. Well you probably also put it in the filter screw hole when you want to shot in low light. In low light you don't want to waste any of the available light by using the cameras internal filter.
With Tri-x also just leave the screw where it is. The camera will disengage the filter automatically.
You need to change your name on the forum to your real first and second name. It is a role of this forum
Cheers
Richard
  • 0


Pro 8mm

Zylight

Rig Wheels Passport

Paralinx LLC

Ritter Battery

Broadcast Solutions Inc

Tai Audio

The Slider

CineLab

Media Blackout - Custom Cables and AKS

Glidecam

Visual Products

Technodolly

CineTape

Willys Widgets

rebotnix Technologies

Aerial Filmworks

Abel Cine

Pro 8mm

Broadcast Solutions Inc

Zylight

Willys Widgets

Rig Wheels Passport

Tai Audio

rebotnix Technologies

The Slider

CineLab

Aerial Filmworks

Visual Products

CineTape

Paralinx LLC

Abel Cine

Media Blackout - Custom Cables and AKS

Ritter Battery

Glidecam

Technodolly