Jump to content


Photo

Arriflex 16BL.....Help!


  • Please log in to reply
5 replies to this topic

#1 Mark Day

Mark Day
  • Basic Members
  • PipPip
  • 78 posts
  • Cinematographer
  • Greenville, SC

Posted 19 January 2017 - 01:09 PM

Hey guys, I have a16BL and I need to connect power up to it for test purposes.  I have none of the power cables.   I need to find out which pins supply the power to the motor.  Does anyone know where I can get a wiring diagram for one of these?  I have looked and looked 'til I'm magenta in the face.  I have several 'user' and 'owner manuals', but no repair information.  If everything is copacetic with this camera, I'm selling my 16S.

Thanks!


  • 0

#2 James Jeffrey Cotter

James Jeffrey Cotter
  • Basic Members
  • PipPip
  • 32 posts
  • Cinematographer
  • United States

Posted 19 January 2017 - 02:18 PM

I have complete wiring diagram in German and rather difficult for someone that is not engineer  to extract what you want from it. I can photo it for you but it is large like 48 X 24 inches.  If you just want a cord for bl I am certain I can find one in my garage somewhere,


  • 0

#3 Kenny N Suleimanagich

Kenny N Suleimanagich
  • Basic Members
  • PipPipPipPip
  • 900 posts
  • Cinematographer
  • New York

Posted 19 January 2017 - 05:49 PM

Isn't it standard 4-pin XLR? 


  • 0

#4 Dom Jaeger

Dom Jaeger
  • Basic Members
  • PipPipPipPip
  • 1597 posts
  • Other
  • Melbourne, Australia

Posted 19 January 2017 - 07:43 PM

It's the camera I know least about, but I do have some old notes on the 16BL written by a technician I trained under years ago.

 

According to those notes the power socket could be 9 pin Amphenol, 7 pin Cannon or 4 pin XLR.

 

If it's an 9 pin Amphenol, pins A and J are wired to positive 12V, pin B is negative, pins C ,F and K are bridged. 

 

If it's a 7 pin Cannon, pin 1 is negative, pin 4 positive 12V, and pins 3 and 6 are bridged.

 

A 4 pin XLR is pin 1 neg, pin 4 pos.


  • 0

#5 Mark Day

Mark Day
  • Basic Members
  • PipPip
  • 78 posts
  • Cinematographer
  • Greenville, SC

Posted 19 January 2017 - 09:17 PM

I have complete wiring diagram in German and rather difficult for someone that is not engineer  to extract what you want from it. I can photo it for you but it is large like 48 X 24 inches.  If you just want a cord for bl I am certain I can find one in my garage somewhere,

Wow man, if you have a cord, I am definitely interested!


  • 0

#6 Mark Day

Mark Day
  • Basic Members
  • PipPip
  • 78 posts
  • Cinematographer
  • Greenville, SC

Posted 19 January 2017 - 09:20 PM

It's the camera I know least about, but I do have some old notes on the 16BL written by a technician I trained under years ago.

 

According to those notes the power socket could be 9 pin Amphenol, 7 pin Cannon or 4 pin XLR.

 

If it's an 9 pin Amphenol, pins A and J are wired to positive 12V, pin B is negative, pins C ,F and K are bridged. 

 

If it's a 7 pin Cannon, pin 1 is negative, pin 4 positive 12V, and pins 3 and 6 are bridged.

 

A 4 pin XLR is pin 1 neg, pin 4 pos.

Thanks.  It's the 9 pin Amphenol. So I wire pins A and J with Pos. and B is Neg?

 

Isn't it standard 4-pin XLR? 

9 Pin Amphenol.


  • 0


FJS International, LLC

Aerial Filmworks

Broadcast Solutions Inc

Rig Wheels Passport

Glidecam

Ritter Battery

Abel Cine

CineTape

The Slider

Paralinx LLC

Media Blackout - Custom Cables and AKS

Tai Audio

rebotnix Technologies

Metropolis Post

Opal

Technodolly

Visual Products

Gamma Ray Digital Inc

Wooden Camera

Willys Widgets

CineLab

Willys Widgets

Glidecam

Paralinx LLC

Gamma Ray Digital Inc

Aerial Filmworks

Tai Audio

Visual Products

FJS International, LLC

Opal

CineTape

Technodolly

Ritter Battery

rebotnix Technologies

The Slider

Media Blackout - Custom Cables and AKS

Broadcast Solutions Inc

Metropolis Post

CineLab

Wooden Camera

Rig Wheels Passport

Abel Cine