Jump to content


Photo

Help Identifying Scoopic Connector

Scoopic battery power canon grey Scoopic

  • Please log in to reply
7 replies to this topic

#1 Adam Fox-Long

Adam Fox-Long

    New

  • Basic Members
  • Pip
  • 4 posts
  • Student
  • Lansing

Posted 08 April 2017 - 06:06 PM

Does anyone know what the external battery connector on the grey canon Scoopic is called or where I could find one? It has 4 pins but it's clearly not XLR
  • 0

#2 Jean-Louis Seguin

Jean-Louis Seguin
  • Basic Members
  • PipPipPipPip
  • 676 posts
  • Other
  • Montreal, Canada

Posted 08 April 2017 - 08:28 PM

If you're referring to the original Scoopic 16, it's a Hirose connector part number RM12WBP-4S(71).
Digikey has it as part number HR1793-ND. The cable clamp is sold separately.
  • 0

#3 Adam Fox-Long

Adam Fox-Long

    New

  • Basic Members
  • Pip
  • 4 posts
  • Student
  • Lansing

Posted 08 April 2017 - 09:44 PM

If you're referring to the original Scoopic 16, it's a Hirose connector part number RM12WBP-4S(71).
Digikey has it as part number HR1793-ND. The cable clamp is sold separately.

 

Thanks so much! You wouldn't happen to know the part number for the clamp? I can't seem to find the right one. I'm very new to this


Edited by Adam Fox-Long, 08 April 2017 - 09:53 PM.

  • 0

#4 Jean-Louis Seguin

Jean-Louis Seguin
  • Basic Members
  • PipPipPipPip
  • 676 posts
  • Other
  • Montreal, Canada

Posted 08 April 2017 - 09:54 PM

https://www.digikey....1783-ND/1125584

I think it's at the bottom of the page.
  • 0

#5 Adam Fox-Long

Adam Fox-Long

    New

  • Basic Members
  • Pip
  • 4 posts
  • Student
  • Lansing

Posted 08 April 2017 - 10:02 PM

Once again, thank you! So now the trick would be connecting it to a cable and power source. Is it as easy as just removing whatever the connection is on the external pack and replacing it with this one?


  • 0

#6 Jean-Louis Seguin

Jean-Louis Seguin
  • Basic Members
  • PipPipPipPip
  • 676 posts
  • Other
  • Montreal, Canada

Posted 09 April 2017 - 11:29 AM


The cable clamp is available in 4 types accordong to the diameter in millimeters of the cable used.
Hirose # RM12WBP-CP(x)(71)
Replace x with either 4, 5, 6 or 7
Digikey # HR1800-ND thru HR1804-ND

Refer to catalog page 429

As for the connector on the battery pack side, 4pin XLR (male) is the standard.

Edited by Jean-Louis Seguin, 09 April 2017 - 11:36 AM.

  • 0

#7 Gregg MacPherson

Gregg MacPherson
  • Basic Members
  • PipPipPipPip
  • 1718 posts
  • Other
  • New Zealand

Posted 09 April 2017 - 06:07 PM

Hey, Jean-Louis,

Can I tap your encyclopedic lore and ask what is the spec for the stepped 2 pin connector for the ACL ergonomic handgrip.  I'll put a separate thread on it so that the categorisation makes it easy to find for others later..

 

Cheers,

Gregg (Gregoire).


  • 0

#8 Jean-Louis Seguin

Jean-Louis Seguin
  • Basic Members
  • PipPipPipPip
  • 676 posts
  • Other
  • Montreal, Canada

Posted 09 April 2017 - 06:57 PM

I'm not 100% sure but I think it's a very early LEMO connector. I can look it up.
  • 0



Also tagged with one or more of these keywords: Scoopic, battery, power, canon, grey Scoopic

Ritter Battery

Metropolis Post

The Slider

Pro 8mm

ZoomCrane

rebotnix Technologies

Abel Cine

Media Blackout - Custom Cables and AKS

FJS International, LLC

CineLab

Broadcast Solutions Inc

Paralinx LLC

CineTape

Visual Products

Gamma Ray Digital Inc

Glidecam

Technodolly

Tai Audio

Aerial Filmworks

Willys Widgets

Rig Wheels Passport

Quantum Music Works

rebotnix Technologies

Media Blackout - Custom Cables and AKS

ZoomCrane

The Slider

CineTape

Visual Products

Technodolly

Broadcast Solutions Inc

Paralinx LLC

Willys Widgets

Glidecam

Quantum Music Works

Aerial Filmworks

Gamma Ray Digital Inc

CineLab

Rig Wheels Passport

Tai Audio

FJS International, LLC

Abel Cine

Metropolis Post

Ritter Battery

Pro 8mm