Jump to content


Photo

Arricam LT

arricam arricam lt arricam st magazines 1000ft gripping jib

  • Please log in to reply
3 replies to this topic

#1 Kaspar Kamu

Kaspar Kamu
  • Basic Members
  • PipPip
  • 20 posts
  • Cinematographer
  • Berlin, Germany.

Posted 07 May 2017 - 07:25 AM

Dear all,

 

I'm shooting a short film next month with an Arricam LT. Our number of mags are limited, so we will go with 1000' rolls. On the ST I've seen that the magazines can be mounted on top of the camera. My question is whether it's possible to do this with the LT as well. 

 

We need to do this, since many shots will be on a jib, and if the magazine is mounted to the rear, it will undoubtedly knock against the jib if we're in a steep low-angle.

Alternatively (and this might be a question better suited to a gripping subforum) is there a way of extending the jib to avoid the aforementioned problem? '

 

Many thanks in advance! 

 


  • 0

#2 Dom Jaeger

Dom Jaeger
  • Basic Members
  • PipPipPipPip
  • 1541 posts
  • Other
  • Melbourne, Australia

Posted 07 May 2017 - 10:00 AM

If you check out the various quick guides online such as:

 

http://cinematograph...cam lite_qg.pdf

or

http://www.arrirenta...systemguide.pdf

 

you can see there is an adapter that allows you to use studio mags on an Arricam LT at a slightly elevated and angled position, but there is no facility to mount a mag directly on top.


  • 0

#3 Kaspar Kamu

Kaspar Kamu
  • Basic Members
  • PipPip
  • 20 posts
  • Cinematographer
  • Berlin, Germany.

Posted 07 May 2017 - 05:35 PM

If you check out the various quick guides online such as:

 

http://cinematograph...cam lite_qg.pdf

or

http://www.arrirenta...systemguide.pdf

 

you can see there is an adapter that allows you to use studio mags on an Arricam LT at a slightly elevated and angled position, but there is no facility to mount a mag directly on top.

 

Thanks for your reply. 

 

Do you know if this would still work on a jib arm? 


  • 0

#4 Satsuki Murashige

Satsuki Murashige
  • Sustaining Members
  • 3510 posts
  • Cinematographer
  • San Francisco, CA

Posted 08 May 2017 - 03:59 AM

Depending on the jib, you may be able to undersling the camera which could solve the problem. Long cameras are not usually a problem for something like a Jimmy Jib. Most broadcast and Alexa/zoom lens rigs are longer and work fine.
  • 0



Also tagged with one or more of these keywords: arricam, arricam lt, arricam st, magazines, 1000ft, gripping, jib

Glidecam

FJS International, LLC

Willys Widgets

Ritter Battery

Abel Cine

Tai Audio

Paralinx LLC

CineLab

CineTape

rebotnix Technologies

Rig Wheels Passport

Metropolis Post

Technodolly

Visual Products

Wooden Camera

Aerial Filmworks

Gamma Ray Digital Inc

Broadcast Solutions Inc

The Slider

Media Blackout - Custom Cables and AKS

Ritter Battery

Paralinx LLC

FJS International, LLC

Wooden Camera

Visual Products

Rig Wheels Passport

Broadcast Solutions Inc

rebotnix Technologies

Glidecam

Tai Audio

Aerial Filmworks

CineLab

Media Blackout - Custom Cables and AKS

Technodolly

Abel Cine

Metropolis Post

Willys Widgets

Gamma Ray Digital Inc

The Slider

CineTape