Jump to content


Photo

Microphone Mounting options for a K3

16mm field recording documentary krasnogorsk diy cage audio recording

  • Please log in to reply
8 replies to this topic

#1 Baltasar Thomas

Baltasar Thomas
  • Basic Members
  • PipPip
  • 19 posts
  • Student
  • Ghent, Belgium

Posted 22 April 2018 - 09:36 AM

Hi everyone,

Upon reading my question most of you will probably be like: "...why?", but hear me out.

 

I'm looking for options to mount a recorder/shotgun-mic combo on a Krasnogorsk 3 camera.

 

For my own experimental documentary work I want to use my K3. I've used it a few times now. Hand-processed the film and am mostly satisfied with the results. I'm interested in using non-sync sound with the images. (Playing a lot with the sounddesign in the edit). For this purpose, the images are digitized. I finish most of my projects in digital.

I like the K3 for its simplicity and small size.

 

In terms of sound, I'm interested in the things that occur around the image, where the frame ends so to speak. Also - the things heard right before and after a scene.

 

I'll be recording on my own and that's why I need a quick and easy to use setup. Having to put the camera down to handle a recorder-mic combo like a Zoom H6 would be to slow and I think I'd quickly run into situations where I would have no place to put the camera for the time being.

 

Right now, I'm thinking of creating some sort of cage to mount a small recorder-mic unit like the Zoom F1 on top of the camera. Ideally, I'd be able to mount a rosette grip somewhere as well. The K3's is not making it easy on me though. I need to be able to access both sides in order to wind the camera and change the film, and I need to be able to access the back for the viewfinder.

 

So, there it is! If any of you can think of some DIY solutions to this problem please do share! Or if you know of some very modular cages that might be suited, that would be great as well!

Thanks!

 

 


  • 0

#2 Brian Drysdale

Brian Drysdale
  • Basic Members
  • PipPipPipPip
  • 5235 posts
  • Cinematographer

Posted 22 April 2018 - 12:47 PM

I suspect you';ll find that the camera noise will make for a poor quality recording. It would be better to keep the mic well away from the camera. 


  • 0

#3 Baltasar Thomas

Baltasar Thomas
  • Basic Members
  • PipPip
  • 19 posts
  • Student
  • Ghent, Belgium

Posted 23 April 2018 - 01:49 PM

I suspect you';ll find that the camera noise will make for a poor quality recording. It would be better to keep the mic well away from the camera. 

 

Hi Brian, thanks for thinking with me here. I'm aware of the noise of the camera and it not being suited to record sync-sound with for common purposes.
I still want to mount a mic on it though, because I need one to be accessible just before, during and right after filming.

Right now I'm thinking of gluing a cold-shoe mount on top of the camera. But I'd rather build a nice rig with a cheese plate, handle etc.
So if anyone has any suggestions..!


Edited by Baltasar Thomas, 23 April 2018 - 01:49 PM.

  • 0

#4 Mark Dunn

Mark Dunn
  • Basic Members
  • PipPipPipPip
  • 2763 posts
  • Other
  • London

Posted 23 April 2018 - 02:25 PM

Maybe just a flash bracket like this then

https://www.wexphoto...-xoCdLwQAvD_BwE

 

1006101.jpg


Edited by Mark Dunn, 23 April 2018 - 02:26 PM.

  • 0

#5 Baltasar Thomas

Baltasar Thomas
  • Basic Members
  • PipPip
  • 19 posts
  • Student
  • Ghent, Belgium

Posted 23 April 2018 - 03:39 PM

Hi Mark, something like that might do the trick! Hadn't thought of those, might be simple yet effective. Might be in the way of the filmdoor or wind-up crank though.


  • 0

#6 aapo lettinen

aapo lettinen
  • Basic Members
  • PipPipPipPip
  • 1151 posts
  • Other
  • Finland

Posted 23 April 2018 - 05:02 PM

something like a stereo microphone bar could also work   :)

and it has the needed 3/8" screws already installed 

km-23550_1.jpg


Edited by aapo lettinen, 23 April 2018 - 05:03 PM.

  • 0

#7 Gareth Blackstock

Gareth Blackstock
  • Basic Members
  • PipPipPip
  • 149 posts
  • Other
  • Australia

Posted 30 April 2018 - 06:33 AM

Don't forget the staple tools of every film maker... Duct tape, plastic ties, and heaps loads of Velcro...
  • 0

#8 Baltasar Thomas

Baltasar Thomas
  • Basic Members
  • PipPip
  • 19 posts
  • Student
  • Ghent, Belgium

Posted 04 May 2018 - 05:16 AM

something like a stereo microphone bar could also work   :)

and it has the needed 3/8" screws already installed 

km-23550_1.jpg

Thx aapo! Great suggestion..!

 

Don't forget the staple tools of every film maker... Duct tape, plastic ties, and heaps loads of Velcro...

Velcro...how could I forget! Thanks guys, it'll probably become some sort of monster using several of these combined..! I'll post a pic of my set-up when it's in use.


  • 0

#9 Mark Dunn

Mark Dunn
  • Basic Members
  • PipPipPipPip
  • 2763 posts
  • Other
  • London

Posted 04 May 2018 - 05:27 AM

Hi Mark, something like that might do the trick! Hadn't thought of those, might be simple yet effective. Might be in the way of the filmdoor or wind-up crank though.

Just swing it out of the way. The extra hand-hold might be useful as well.


Edited by Mark Dunn, 04 May 2018 - 05:29 AM.

  • 0



Wooden Camera

The Slider

Metropolis Post

Abel Cine

Technodolly

Aerial Filmworks

New Pro Video - New and Used Equipment

Tai Audio

rebotnix Technologies

Visual Products

Paralinx LLC

Glidecam

Media Blackout - Custom Cables and AKS

Ritter Battery

Gamma Ray Digital Inc

CineTape

FJS International, LLC

Broadcast Solutions Inc

Willys Widgets

Rig Wheels Passport

CineLab

Ritter Battery

Broadcast Solutions Inc

Media Blackout - Custom Cables and AKS

Tai Audio

Rig Wheels Passport

CineLab

Abel Cine

CineTape

rebotnix Technologies

Wooden Camera

FJS International, LLC

Glidecam

The Slider

Metropolis Post

Gamma Ray Digital Inc

Technodolly

Willys Widgets

New Pro Video - New and Used Equipment

Paralinx LLC

Aerial Filmworks

Visual Products