Jump to content


Photo

What do these settings indicate? (DEDOLIGHT DLH4)

dedolight lighting dimmer settings help query

  • Please log in to reply
3 replies to this topic

#1 Megan Bryan

Megan Bryan

    New

  • Basic Members
  • Pip
  • 2 posts
  • Student
  • England

Posted 01 May 2018 - 11:04 AM

Hi, I'm fairly new to this forum so hopefully, I'm writing this query in the right place.
 
For my dissertation, I completed a test using Dedolight DLH4's (The 3 head kit) and I used the dimmer switch to adjust the intensity of the light.
 
I was wondering what the dots represent on the dimmer switch?

 

I've attached an image below for reference. I was hoping to find a numerical value as so far my research has only found this indicating 'dimming from minimum to maximum'.

 

Any information or guesses are greatly appreciated and hopefully, someone can shed some light on this!!

 

Thank you.

 

dimmer-switch-image.png


  • 0

#2 Adrian Sierkowski

Adrian Sierkowski
  • Sustaining Members
  • 7439 posts
  • Cinematographer
  • Los Angeles, Ca

Posted 01 May 2018 - 11:17 AM

Well there's I think 16 notches, so 100% being top and 0% being bottom each notch is 6.25% so therefore the "dots" would be 0, 37% (ish, probably 25% visible) 68% ish (and that's probably 50% visivble) and then 100% That's what I'd assume. But really it won't be EXACT, it's just, as I often say "good enough for government work."


  • 0

#3 JD Hartman

JD Hartman
  • Basic Members
  • PipPipPipPip
  • 1780 posts
  • Gaffer
  • Edison, N.J. U.S.A.

Posted 01 May 2018 - 05:07 PM

Test the output with a lightmeter at various setting of the slider (min., max., in-between), interpolate the rest.


  • 0

#4 Megan Bryan

Megan Bryan

    New

  • Basic Members
  • Pip
  • 2 posts
  • Student
  • England

Posted 02 May 2018 - 05:02 PM

Test the output with a lightmeter at various setting of the slider (min., max., in-between), interpolate the rest.

 

 

Well there's I think 16 notches, so 100% being top and 0% being bottom each notch is 6.25% so therefore the "dots" would be 0, 37% (ish, probably 25% visible) 68% ish (and that's probably 50% visivble) and then 100% That's what I'd assume. But really it won't be EXACT, it's just, as I often say "good enough for government work."

 

Thank you both for your suggestions! Both are very helpful, thank you.


  • 0



Also tagged with one or more of these keywords: dedolight, lighting, dimmer, settings, help, query

Ritter Battery

CineLab

Visual Products

Aerial Filmworks

Abel Cine

Broadcast Solutions Inc

CineTape

rebotnix Technologies

Media Blackout - Custom Cables and AKS

Technodolly

Gamma Ray Digital Inc

Rig Wheels Passport

FJS International, LLC

Wooden Camera

Willys Widgets

Paralinx LLC

Tai Audio

The Slider

Glidecam

New Pro Video - New and Used Equipment

Metropolis Post

FJS International, LLC

Rig Wheels Passport

Metropolis Post

CineLab

rebotnix Technologies

Gamma Ray Digital Inc

Broadcast Solutions Inc

Visual Products

CineTape

Glidecam

Tai Audio

Ritter Battery

Willys Widgets

Aerial Filmworks

Technodolly

Wooden Camera

Paralinx LLC

The Slider

New Pro Video - New and Used Equipment

Abel Cine

Media Blackout - Custom Cables and AKS