Once again thanks to those on here for their help & support. I am about to do a shoot at a theme park on a dark ride. The client wants to show 2 rides. The 1st is completely pitch black except for some areas - eg. passing through LED fire ring, LED star, etc) but add not a lot of light at all. The other ride lighting is hitting the props/character installations but no light on the coaster or people.
I went for a recce and the lights hitting the character installations on the 2nd ride expose around F 2.1. So I have gathered lenses that can accommodate for this. I am in the middle of planning what lights I will need to highlight the areas in complete darkness for both rides. I am trying to decide whether I need a 5k Arri Tungsten with 2x 2k Blondes or will 3x 2k Blondes be enough without a 5k.
My idea is to not make them look lit in the most case going around the ride but more to just bring up the ambient light on the actors. I can take a 5k and bounce off Polly for the ambient, filling in other areas if need be with 2k blondes or just do this plan with only 2k blondes. If I choose to use a 5k I will have to do a long cable run from the control panel, however, I can power 2k's from inside the location.
I also am debating whether to rig small lights to the rollercoaster next to our rigged camera for our reverse POV, so I have a consistent exposure on the actors while they go through the ride. Or if I should lock the ride off and try to recreate this with lights, a fan, and a dark background. Any thoughts on this also would be appreciated.
I am attaching some pictures below. Please let me know your thoughts: