Jump to content


Photo

super16mm lens mount


  • Please log in to reply
7 replies to this topic

#1 Robert Glenn

Robert Glenn
  • Basic Members
  • PipPipPip
  • 247 posts
  • Other

Posted 04 October 2005 - 04:34 PM

It's a basic question, but the conversion of regular 16mm to 35mm mountwise just means recentering the mount 1mm to the left, or is it the right? This is if you're behind the camera. Also is it exactly 1mm?
Thanks
  • 0

#2 Robert Glenn

Robert Glenn
  • Basic Members
  • PipPipPip
  • 247 posts
  • Other

Posted 04 October 2005 - 04:56 PM

It's a basic question, but the conversion of regular 16mm to 35mm mountwise just means recentering the mount 1mm to the left, or is it the right? This is if you're behind the camera. Also is it exactly 1mm?
Thanks

sorry i meant regular 16mm to super16mm
  • 0

#3 Nathan Milford

Nathan Milford
  • Sustaining Members
  • 692 posts
  • Director
  • New York, NY

Posted 04 October 2005 - 06:31 PM

Facing the gate, the super 16 area of the gate expands to the left (opposite of the claw). It follows that the mount will also move to the left. I'm not sure if it's 1mm exactly. I'm not at my bench so I don't have access to my notes, but I'd wager you're moving it somewhere between 1.07 - 1.25 mm. It really depends on what the camera manufacturer decided was the 'real' Super16 aperture. They vary by as much as 250 microns between manufacturers.
  • 0

#4 Robert Glenn

Robert Glenn
  • Basic Members
  • PipPipPip
  • 247 posts
  • Other

Posted 04 October 2005 - 06:49 PM

Facing the gate, the super 16 area of the gate expands to the left (opposite of the claw). It follows that the mount will also move to the left. I'm not sure if it's 1mm exactly. I'm not at my bench so I don't have access to my notes, but I'd wager you're moving it somewhere between 1.07 - 1.25 mm. It really depends on what the camera manufacturer decided was the 'real' Super16 aperture. They vary by as much as 250 microns between manufacturers.

thanks nathan!
  • 0

#5 Dimitrios Koukas

Dimitrios Koukas
  • Sustaining Members
  • 569 posts
  • Cinematographer
  • Athens, Greece, London UK

Posted 05 October 2005 - 03:12 AM

thanks nathan!


Remember to change the gate too ..... ;)
Dimitrios Koukas
  • 0

#6 Stephen Williams

Stephen Williams
  • Sustaining Members
  • 4708 posts
  • Cinematographer
  • Europe

Posted 05 October 2005 - 03:58 AM

but I'd wager you're moving it somewhere between 1.07 - 1.25 mm. It really depends on what the camera manufacturer decided was the 'real' Super16 aperture. They vary by as much as 250 microns between manufacturers.



Hi,

You would win! I have 1.13mm in some notes I have. As you say it varies by manufacture.

Stephen
  • 0

#7 Nathan Milford

Nathan Milford
  • Sustaining Members
  • 692 posts
  • Director
  • New York, NY

Posted 05 October 2005 - 08:56 AM

Hi,

You would win! I have 1.13mm in some notes I have. As you say it varies by manufacture.

Stephen



Do I get a cookie?
  • 0

#8 Robert Glenn

Robert Glenn
  • Basic Members
  • PipPipPip
  • 247 posts
  • Other

Posted 05 October 2005 - 04:29 PM

thanks again guys..... I'm trying to make a dual rod support for my NPR and my mattebox has no horizontal or vertical adjust, so precision is important! A 1.1mm offset should get everything centered pefect I think.
  • 0


Gamma Ray Digital Inc

Ritter Battery

CineTape

Willys Widgets

The Slider

Glidecam

FJS International, LLC

Metropolis Post

Broadcast Solutions Inc

Opal

Wooden Camera

Paralinx LLC

Media Blackout - Custom Cables and AKS

Visual Products

Rig Wheels Passport

Aerial Filmworks

Tai Audio

CineLab

Abel Cine

rebotnix Technologies

Technodolly

Tai Audio

Gamma Ray Digital Inc

Technodolly

Willys Widgets

Paralinx LLC

Wooden Camera

Abel Cine

Ritter Battery

FJS International, LLC

rebotnix Technologies

The Slider

CineTape

Media Blackout - Custom Cables and AKS

Glidecam

Metropolis Post

CineLab

Visual Products

Broadcast Solutions Inc

Aerial Filmworks

Opal

Rig Wheels Passport